Monitoring Wan Ports Status - NETGEAR ProSafe Quad WAN FR538G Reference Manual

ProSafe Quad WAN Gigabit Firewall FR538G Reference Manual
Table 5-3. Router Status Fields
Item Description
System Name This is the Account Name that you entered in the Basic Settings page.
Firmware Version This is the current software the router is using. This will change if you upgrade your
router.
LAN Port Displays the current settings for MAC address, IP address, DHCP role and IP Subnet
Mask that you set in the LAN IP Setup page. DHCP can be either Server or None.
WAN1 Configuration Indicates whether the WAN Mode is Single, Dual, or Rollover, and whether the WAN
State is UP or DOWN. It also displays if:
• NAT is Enabled or Disabled.
• Connection Type: DHCP enabled or disabled.
• Connection State
• WAN IP Address
• Subnet Mask
• Gateway Address
• Primary and Secondary DNS Server Addresses
• MAC Address.
WAN2 Configuration Displays the same details as for WAN1 Configuration.
WAN3 Configuration Displays the same details as for WAN1 Configuration.
WAN4 Configuration Displays the same details as for WAN1 Configuration.
Note: The Router Status screen displays current settings and statistics for your router. As
this information is read-only, any changes must be made on other pages.

Monitoring WAN Ports Status

You can monitor the status of both of the WAN connections, the Dynamic DNS Server
connections, and the DHCP Server connections. Select Network Configuration from the main
menu and WAN Settings from the submenu. The WANI ISP Settings screen will display. Click
the WAN Status link to obtain status on the WAN1 port. Select the WAN2 IAP Settings tab and
click the WAN Status link to obtain status on the WAN2 port.
5-24
v1.0, November 2007
Router and Network Management