Setting Menu Screens - JVC gy-dv5100 Instructions Manual

11. MENU SCREENS

11-2 Setting Menu Screens

SHUT-
TER
dial
MENU screen
Cursor
CAMERA OPERATION..
CAMERA PROCESS..
AUDIO/VIDEO..
LCD/VF..
TC/UB/CLOCK..
OTHERS..
FILE MANAGE..
MENU ALL RESET
EXIT
Item
––– CAMERA OPERATION –––
SHUTTER
FAW
GAIN L
GAIN M
GAIN H
LOLUX GAIN
SMOOTH TRANS
SPOT L/BACK L
ASPECT RATIO
PAGE BACK
CAMERA OPERATION MENU screen
Downloaded From CamcorderManual.com JVC Manuals
72
EDITSEARCH
MONITOR
FILTER
1 3200K
2 5600K 1 8 / ND
.3 5600K
.4 5600K 1 64 / ND
STATUS
SHUTTER
LCD BRIGHT
MENU
AUDIO
LEVEL
FRONT
REAR
AUTO IRIS FULL AUTO BLACK LOLUX
CH-1 CH-2
CH-1
MODE AUDIO IN
BACK L STRETCH AUDIO SELECT
VTR
NORMAL NORMAL CH-1
SPOT L COMPRESS AUTO
CAM MANUAL
POWER VTR
ON OFF
STATUS button
STA
SHUTTER
MENU
––– MENU –––
CANCEL
TOP MENU screen
Setting
STEP
PRESET
6dB
9dB
ALC
30dB
ON
MIDDLE
4:3
Make the settings while observing the LCD monitor or the
viewfinder screen. If the OUTPUT CHAR. item on the OTHERS
(1/2) screen is set to ON, the menu screen can also be viewed
on a monitor connected to the MONITOR OUT or Y/C OUT
OPEN
connector.
1.
DISPLAY
Set the POWER switch to ON.
PULL
OPEN
CH-2
CH-2
2.
Set the mode of the GY-DV5100 with the MODE switch.
(Camera mode or VTR mode)
3.
Press the STATUS button for 1 second or longer.
● The TOP MENU screen appears.
4.
Select the menu screen to be set.
Rotate the SHUTTER dial to align the cursor ( ) with the
menu screen to be set, and then press the SHUTTER dial.
● The selected menu screen appears.
5.
Select the menu item on the menu screen.
Rotate the SHUTTER dial to align the cursor ( ) with the
item to be set, and then press the SHUTTER dial.
● The setting area of the selected item starts blinking, and
the setting can now be made.
6.
Change the setting.
Rotate the SHUTTER dial to change the setting, and then
press the SHUTTER dial.
● The setting area stops blinking and the setting is entered.
■ To change multiple items, repeat the procedures in steps
6.
and above.
7.
Return to the TOP MENU.
Rotate the SHUTTER dial to align the cursor ( ) with the
PAGE BACK item, and then press the SHUTTER dial.
■ To change settings on other menu screens, repeat the
procedures in steps
■ To save the set contents in FILE A or B, select the FILE
MANAGE menu screen and perform the operations for saving
to file. ☞ See "FILE MANAGE Menu Screen" on page 73.
8.
To return to the normal screen after completing the settings,
use either of the following methods.
● Press the STATUS button
or
● Return to the TOP MENU screen and align the cursor ( )
with the EXIT item, and then press the SHUTTER dial.
4. 7.
to above.
5.