Outputting Audio - JVC GY-HD110 Instructions Manual

Outputting Audio

MONITOR VTR indicator
SELECT
switch
SHUTTER
dial
STATUS
button
AUDIO menu screen
Table 1
MONITOR
SELECT
AUDIO MONITOR
CH-1
BOTH
CH-2
CAM/VTR button
* In HDV format, you can only select the settings within the bold frame.
PB AUDIO CH [DV]
- L/R:CH1
MIX L/R:CH1+CH2
STEREO L:CH1 R:CH2
- L/R:CH2
Setting
Confirm that the GY-HD110 is in the VTR mode.
(VTR indicator: On)
1.
Display the AUDIO menu screen.
Select the AUDIO item on the TOP MENU screen.
2.
Set the AUDIO menu screen.
• AUDIO MONITOR Items
MIX : Outputs mixed audio
STEREO : Outputs stereo audio
• PB AUDIO CH [DV] Items
CH1/2 : To reproduce the sound (CH-1, CH-2)
recorded during shooting.
MIX : To reproduce the sound recorded during
shooting (CH-1, CH-2) and the after-
recorded sound (on CH-3 and CH-4)
simultaneously.
CH3/4 : To reproduce the sound after-recorded
on CH-3 and CH-4.
3.
Set the MONITOR SELECT switch.
Refer to Table 1 below to make the setting.
4.
Either of the following operations returns you to the nor-
mal screen.
• Press the STATUS button
or
• Return to the TOP MENU screen, select the EXIT item
and press the SHUTTER dial.
MEMO
The DV format is capable of recording up to 4 channels
when the 12-bit, 32 kHz sampling frequency is employed.
The GY-HD110 records audio on the two channels CH-1
and CH-2. (4-channel recording is possible in the case of
DV input. (GY-HD110U/GY-HD111E only))
When the GY-HD110 is used for playback of a tape that was
recorded on another unit with audio recorded on the CH-3
and CH-4 channels, the PB AUDIO CH [DV] item on the
AUDIO menu screen must be set.
After-recording on the CH-3 and CH-4 channels is not possi-
ble.
CH1/2 MIX
L/R:CH1+CH3
L/R:CH1+CH2+CH3+CH4
L:CH1+CH3 R:CH2+CH4
L/R:CH2+CH4
PLAYBACK MODE
CH3/4
L/R:CH3
L/R:CH3+CH4
L:CH3 R:CH4
L/R:CH4
55