Obtaining A Report From Hp - HP 6400/8400 Software Manual

5. Select Customer Details and enter the following information:
a. Enter your name in Name. This information is required.
b. Enter your e-mail address in E-Mail to receive the completed report. This information is
required. It is not necessary to have an e-mail address connected to the EVA controller. You
should enter the e-mail address where you typically receive e-mail. To enter multiple email
addresses in E-Mail, separate entries with a semicolon (;).
c. Enter data in the remaining boxes as appropriate. This information is included in the reports,
but is not required.
d. To send your raw data to HP automatically when creating a report, select Automatically
e-mail the collected raw data on completion.
e. Click Next to save and proceed.
NOTE:
For information on using Advanced Settings, see the SAN Visibility user guide.

Obtaining a report from HP

Once you have configured SAN Visibility for data collection, you can obtain a report. There are two
methods for obtaining a report:
• Automatically—Automatically e-mails your data to HP when collection is complete. This requires
you to know the SMTP address of your mail server. Select the appropriate SMTP address from the
HP StorageWorks Enterprise Virtual Array updating product software guide (XCS 09522000) 23