Checking The Storage System Hardware; Eva Storage Network Properties Window; Hp Command View Eva Online Help - HP 6400/8400 Software Manual

1. Open HP Command View EVA on the management server or the management module, if
applicable. The screen captures in this section reflect server-based management.
The EVA Storage Network Properties window opens.
Figure 1 EVA Storage Network Properties window
.
2. Click Help in the Session pane.
The full version number is displayed at the top of the online help window. If the version listed is
earlier than 9.0.1 or 9.1, it must be upgraded.
Figure 2 HP Command View EVA online help
.
TIP:
The full version number is also shown at the bottom of the login screen.

Checking the storage system hardware

Estimated time to complete: 15–20 minutes
When to perform: 1–2 weeks prior to the upgrade, and then daily until the upgrade is completed.
Provide enough time to order and replace any failed components.
Before upgrading your Enterprise Virtual Array, you should check the operation of the storage system
hardware and replace any failed components. This ensures the storage system will be operating
properly when the upgrade is performed. This task should be performed far enough in advance to
give you time to order and replace any failed hardware components before beginning the upgrade.
HP StorageWorks Enterprise Virtual Array updating product software guide (XCS 09522000) 17