Oki MB451wMFP User Manual page 47

15
Check that the OKI MB491(FAX) icon is
displayed.
If a printer driver for the machine is already
installed, the OKI MB491 icon may represent
these drivers. In this case, right-click the OKI
MB491 icon and select one of the menu items,
and then check that the fax driver is displayed in
the submenu.
16
Remove the "Software DVD-ROM" from
the computer.
The installation is complete.
„ For USB Connection
Follow the procedure below to connect a USB
cable and install a fax driver on your computer.
Note
● You must be logged in as an administrator to complete
this procedure.
Memo
● You can skip this procedure if the fax driver is already
installed on your computer.
1
Prepare a USB cable.
A USB cable is not supplied with your machine.
Prepare a USB 2.0 cable separately.
Memo
● Use a USB 2.0 Hi-Speed cable for a USB 2.0 Hi-
Speed connection.
2
Hold down the power switch for
approximately one second to turn off the
power.
3
Plug one end of the USB cable into the
USB interface connector on the back of
the machine.
4
Turn on the computer.
5
Insert "Software DVD-ROM" into the
computer.
- 47 -
Faxing from a Computer (For Windows)
3