For Mac Os X - Oki MB451wMFP User Manual

Printing from a Computer
◆ Print a test page to check that the printer
driver is successfully installed on the
computer.
1
Click [Start] > [Devices and Printers].
2
Right-click the OKI MB491 icon and
select [Printer properties] (> a desired
printer driver if you have installed
multiple drivers) from the pop-up menu.
3
On the [General] tab, click [Print Test
Page].
5

For Mac OS X

„ Overview
‰ Connecting Methods
You can select either of the following connection
methods:
● "For Network Connection" P.110
● "For USB Connection" P.118
‰ Product Requirements
Your machine supports Mac OS X 10.4 to 10.7.
‰ Types of Printer Drivers
The driver types that can be installed are as
follows.
Type
PS The PS printer driver is suitable for
the printing of documents including
PostScript fonts and EPS data.
It can be also used for normal printing.
PCL The PCL printer driver is suitable for
printing of business documents.
Note
● The description may be different depending on the version
of a printer driver or Mac OS X.
„ For Network Connection
To install a printer driver on your computer
via the network connection, follow the 3 steps
below:
● "Step 1 Configuring the Network Settings of
Your Machine" P.111
● "Step 2 Disabling the Sleep Mode in the
Machine" P.115
● "Step 3 Installing a Printer Driver" P.115
The following procedure uses Bonjour as a
network protocol.
Note
● You need to complete the network setting of the computer
before this procedure.
Memo
● You can skip step 1 if the IP address is already set on your
machine.
● You can skip step 3 if the printer driver is already installed
on your computer.
- 110 -
Description