Controlling Access Using Ip Address (Ip Filtering); Controlling Access Using Mac Address (Mac Address Filtering) - Oki mc series Configuration Manual

Table of Contents

Advertisement

C
ONTROLLING ACCESS USING
You can control access to the machine using the IP address. You can set whether to allow
configuration or printing from the specified IP addresses. By factory default, IP filtering is
disabled.
NOTE
Be sure to specify the correct IP address. If you specify a wrong IP address,
you cannot access the machine using the IP protocol.
When you enable IP filtering, the access to and from a host that is not specified
in this procedure is rejected.
You can use only IPv4 for IP filtering.
1.
Access the machine's web page and log in as the administrator.
2.
Select Admin Setup.
3.
Select Network > Security > IP Filtering.
4.
Follow the on-screen instructions to specify the detailed settings.
NOTE
If nothing is registered in Administrator's IP Address setting, you may not
be able to access the machine depending on the specified IP address range.
Your Current Local Host/Proxy IP Address and the IP address of your
host may not match if you use a proxy server.
5.
Click Submit.
The network system reboots to enable the new settings.
C
ONTROLLING ACCESS USING
You can control access to the machine using the MAC address. You can allow or reject the
access from the specified MAC addresses.
NOTE
Be sure to specify the correct MAC address. If you specify the wrong MAC
address, you cannot access the machine via a network.
You cannot individually specify acceptance or rejection for each address.
1.
Access the machine's web page and log in as the administrator.
2.
Select Admin Setup.
3.
Select Network > Security > MAC Address Filtering.
4.
Follow the on-screen instructions to specify the detailed settings.
NOTE
If nothing is registered in Administrator's MAC Address setting, you may
not be able to access the machine depending on the specified MAC address.
Your Current Local Host/Proxy MAC Address and the MAC address of
your host may not match if you use a proxy server.
5.
Click Submit.
The network system reboots to enable the new settings.
IP
(IP
ADDRESS
FILTERING
MAC
(MAC
ADDRESS
Advanced network settings > 107
)
)
ADDRESS FILTERING

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mps seriesEs series

Table of Contents