Loading Paper; Step 1 Loading Paper Into Tray 1 - Oki MB451wMFP User Manual

Installing Your Machine

Loading Paper

1
Your machine has two built-in trays (tray 1 and MP tray) (MB441/MB461/ES4161 MFP is a Manual
Feeder) and an optional tray (tray 2).
The Optional tray (Tray2) is only available on MB461, MB471, MB471w, MB491, ES4161 MFP, and
ES4191 MP.
This section explains the supported paper and capacity of tray 1 and how to load paper into the tray 1.
After you load paper, you need to register the loaded paper on your machine.
To complete the loading procedures, follow the 2 steps below:
● "Step 1 Loading Paper into Tray 1" P.20
● "Step 2 Configuring the Settings for Tray 1" P.21
„ Tray 1 Specification
Supported paper size
● A4
● A5*
● B5
● A6*
● Letter
● Legal 13
● Legal 13.5
● Legal 14
● Executive
● Statement*
● 16K (184 x 260 mm)
● 16K (195 x 270 mm)
● 16K (197 x 273 mm)
● Custom
Note
● Duplex printing cannot be performed on paper marked with "*".
Reference
● For the specifications and how to load paper in tray 2 (optional), MP tray, and manual feeder, refer to the User's Manual
(Basic) > "1. Setup" > "Loading Paper and Documents" > "Paper" > "Loading Paper".

Step 1 Loading Paper into Tray 1

1
Pull out tray 1.
Paper capacity
250 sheets
(when paper weight is 80 g/m
- 20 -
Paper weight
● Light
2 2
) 60 to 63 g/m
● Medium Light
2
64 to 74 g/m
● Medium
2
75 to 87 g/m
● Medium Heavy
88 to 104 g/m
● Heavy
105 to 122 g/m
2
Slide the paper guide (1) to the width of
the paper to be loaded.
1
(16 to 17 lb)
(18 to 19 lb)
(20 to 23 lb)
2
(24 to 27 lb)
2
(28 to 32 lb)