Teletext - Software Decoder (Tuxtext) Activating - DREAM MULTIMEDIA DREAMBOX DM 500S User Manual

30.3. TuxText position
Press the MENU-Button to enter the OSD-Mainmenu.
Go to Setup -> Sytem Settings -> OSD Settings, press the yellow Option-Button (TuxText position).
What is TuxText? TuxText is a Plugin (additional Software), which allows the Dreambox to decode the
digital Teletext. TuxText is more faster and easier to use.
This Menu is used to adjust the Position of the TuxText. Maybe the Clock does not appear or the
Textpages are not shown in the middle of the screen.
31.

Teletext - Software Decoder (TuxText) activating

Press the HELP-Button for more information.
The red Option-Button enables the Top left Point of
the rectangle.
The green Option-Button enables the Bottom right
Point of the rectangle.
Use the Navigation-Buttons down/right for the Top
left rectangle and up/left for the Bottom right
rectangle to adjust.
Press the OK-Button to exit
Attention:
If you don't see any rectangle, then they are out of
range. Please adjust the rectangle into the middle of
the screen.
Press the OK-Button to bring up the Infobar.The
blue Option-Button activates the Plugins menu.
Please remember, not every service provides
Teletext Information!
Press the OK-Button to activate the "Teletext -
Software Decoder" (TuxText).
TuxText interactive Navigation:
Press the OK-Button to enter the interactive mode.
Use the Navigation-Buttons to select a textpage and
press the OK-Button to call this site. You don't need
to type in a Textpagenumber in this mode.
Press the EXIT-Button to exit.
- 31 -