Email Abbr Programming Errors; Error Message Sent To The Sender; Internet Fax Return Receipt Errors Messages - Panasonic DX 1000 - PanaFax B/W Laser Printer User Manual

Troubleshooting
08001000002

Email ABBR Programming Errors

Error Message Sent to the Sender

08002010001
Error messages that are emailed from the DX-1000 to the original sender during remote programming of the
08002020001
One-Touch / ABBR. No. via email.
08002050001
1 554 Data transfer error (broken header)
2 554 Data transfer error (broken data)
3 554 Data transfer error (FAX module)
4 554 MIME attachment not supported
(message/file)
5 554 MIME format not supported
6 554 ABBR. Dialer contains programmed data
7 554 ABBR format error
8 554 Incorrect password
9 554 Memory full (FAX module)
10 554 Data transfer error

Internet FAX Return Receipt Errors Messages

08002080001
Error messages that are printed on the Internet Fax Return Receipt when remote programming of the
08002020002
One-Touch / ABBR. No. via email fails.
08002050002
1 Format Error : <@list block, the "@end" command
is missing.>
2 Format Error : <@command block, the "@end"
command is missing.>
3 Format Error : <@begin block, the "@begin"
command is missing.>
4 Format Error : <@begin block, the "@end"
command is missing.>
5 Permission denied : <Fax Forward parameter is set
to "Valid".>
6 Permission denied : <Fax machine is busy
performing a task.>
7 Error : <Programmed ABBR. overwrite prohibited.
Use open ABBR. only.>
8 Permission denied : <Password is incorrect.>
9 Permission denied : <Remote Dialer Update
parameter is set to "Invalid".>
10 Format Error : <line no.>
11 Warning : <line no.>
08002080002
166
Error message
Error message
Possible cause
The header or sub header decoding is being processed
while the message finished, try again.
Multiple contents are present and being processed while
the message finished, try again.
Data transfer error occurred in the FAX module while
communicating with the LAN module, try again.
MIME attachment is not supported during this operation,
re-send using plain text in the message body only.
MIME file type is not supported, re-send using plain text
in the message body only.
Can not overwrite existing programmed data, use the
"Delete" command to erase existing data first.
Incorrectly used script in the "SET ABBR" command of
the Subject line. Correct the script and try again.
Incorrect password specified in the "SET ABBR"
command of the Subject line. Correct the password and
try again.
FAX Memory is full, try again later.
Other errors not listed above, try again later.
Possible cause
The block termination command "@end" is missing in the
"@list" block, add the "@end" command and try again.
The block termination command "@end" is missing in the
"@command" block, add the "@end" command and try
again.
The block start command "@begin" is missing in the
"@begin" block, add the "@begin" command and try
again.
The block termination command "@end" is missing in the
"@begin" block, add the "@end" command and try again.
Change the Fax Forward parameter to "Invalid" and try
again.
Try again later when the machine is not busy.
Can not overwrite existing programmed data, use the
"Delete" command to erase the existing data first.
Correct the password and try again.
Set the Remote Dialer Update parameter to "Valid".
The format of the Entry is incorrect / incomplete or the
data string for each station is not defined within a single
line.
The format of the Entry is incorrect or the number of
characters entered, exceed the maximum allowed in the
field. Correct it and try again.