Setting Your Logo - Panasonic DX 1000 - PanaFax B/W Laser Printer User Manual

02009000001

Setting Your LOGO

When you send a document, your LOGO appears on the top of the copy printed out at the other station.
02009020002
The LOGO helps to identify you to someone who receives your document.
1
02009050002
02007060008
#@multitude
2
02009060001
#@multitude
3
02009060004
4
0200906001 1
5
02007060005
#@multitude
Note:
02009070004
02009070014
7
FUNCTION
1
SET
repeatedly until display shows;
Enter your LOGO (max. 25 characters and digits) by using
the Character keys (see page 10).
Ex: P A P8 CAPS n a s o n i
If you make a mistake, use < or > to move the cursor
over the incorrect character, then overwrite it with a correct
one.
If more than 19 characters are entered, the left side
characters will scroll off the display. (See note 2)
SET
STOP
1. Your Company Name or your name must be set as your LOGO because it is required by the Telephone
Consumer Act of 1991. (For details, see FCC NOTICE at the end of this User's Guide)
2. To switch between upper and lower character set, press
entered, the cursor remains on the character awaiting for the next entry or change of character set.
User Parameters
SET MODE
ENTER NO. OR
1:USER PARAMETERS?
PRESS SET TO SELECT
LOGO
c
LOGO
Panasonic
P8 CAPS
key. After the character is
2
(1–6)
37