Table of Contents
Advertisement
Printing from Windows Applications
2.3.3
Advanced Media Settings
Making the Advanced Media settings allows you to activate the following
advanced printer functions.
•
Cover mode: Adds the front cover and/or the back cover to the
document.
•
Page insert: Inserts a blank or printed page before any page(s) of the
document.
•
Transparency interleaving: Inserts a blank or printed page between the
transparencies to be printed.
These functions are explained on the following pages.
To use this feature, you need to change the MP tray mode from the first
mode (default) to the cassette mode. To change the MP tray's first mode
setting, send the PRESCRIBE FRPO T0 command (!R! FRPO T0, 0;
Note
EXIT;) to the printer from the Remote Operation Panel (section
Sending PRESCRIBE Commands to the Printer
commands, refer to the
with the printer.
Cover Mode
In the Cover mode, the first cover page, or the first and back cover pages of
a document will be added to the document using the different paper from
the paper used for the body of the document. The rest of the document will
be printed on the paper specified in the Media tab. This will allow you to
add the covers of the document using special paper, for example thick
paper or colored paper, so that the printed document looks more
professional.
You can also print the first page of the document on the front cover by
checking Print Outside Cover.
Cover Mode can be used with Page Insert but not with Transparency
Interleaving.
Note
Programming Manual
2-23
1.6.7
on page 1-53). For FRPO
on the CD-ROM supplied
Advertisement
Table of Contents
