Indicators; Keys - Oce 1010N - B/W Laser Printer Operation Manual

Operation guide
Table of Contents

Advertisement

Operator Panel
1.1.1

Indicators

Reference
Reference
Reference
Reference
Name
Name
Name
Name
1
Ready indicator
(Green)
2
Data indicator
(Green)
3
Attention
indicator
4
Toner indicator
1.1.2

Keys

Reference
Reference
Name
Name
Reference
Reference
Name
Name
5
(Cancel key)
6
(Go key)
*: For a full description of the standard status page, see the next page. The service status page is used for service purposes.
Refer to the following table for the name and description of each indicator.
The same indicator can have a variety of meanings, depending on the speed
at which it is flashing. For details, see
Status
Status
Status
Status
Lit
Flashing
Off
Lit
Flashing
Lit
Flashing
(Red)
Off
Lit
Flashing
(Red)
Refer to the following table for the name and description of the basic
functions of each key.
Function
Function
Function
Function
key
Cancels printing in progress when pressed for 1 second or more.
key
• Switches between online and offline when pressed for less than 3 seconds.
• Depending on the error message displayed on the KM-NET Remote Operation
Panel, there are cases where operation will continue after pressing this key. If
such a message appears, operation resumes when this key is pressed.
• Prints a standard status page* when pressed for 3 seconds or more and less
than 10 seconds.
• Prints a service status page when pressed for 10 seconds or more.
Chapter 4
Chapter 4
Chapter 4
Chapter 4
Meaning
Meaning
Meaning
Meaning
Indicates online status (printing is possible).
• An error has occurred, but printing resumes when the
key is pressed.
• Offline status. You cannot print, but the printer can receive
data.
• The printer is in sleep mode.
Printing has stopped because an error has occurred.
The printer is processing data.
The printer is receiving data.
The printer cover is open.
• A paper jam has occurred.
• The paper cassette is not inserted properly or the paper has
run out.
The printer status is normal.
The printer has stopped because the toner is exhausted.
The toner is running low.
1-3
.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pp10

Table of Contents