Table of Contents
Advertisement
Indicator
Indicator
Indicator
Indicator
(No indication
patterns available)
Remote Operation
Remote Operation
Remote Operation
Remote Operation
Panel display
Panel display
Panel display
Panel display
Memory card err20
Format error
Memory card
The printer has halted because you attempted to insert/remove a
The printer has halted because you attempted to insert/remove a
The printer has halted because you attempted to insert/remove a
The printer has halted because you attempted to insert/remove a
memory card into/from the printer slot while the printer power is
memory card into/from the printer slot while the printer power is
memory card into/from the printer slot while the printer power is
memory card into/from the printer slot while the printer power is
on.
on.
on.
on.
Turn the power switch off and then on to restart the printer.
Make sure to turn the printer power off before inserting/
removing a memory card.
Note
This message appears when the printer is in the ready state and
This message appears when the printer is in the ready state and
This message appears when the printer is in the ready state and
This message appears when the printer is in the ready state and
the memory card is not formatted, and therefore cannot be read or
the memory card is not formatted, and therefore cannot be read or
the memory card is not formatted, and therefore cannot be read or
the memory card is not formatted, and therefore cannot be read or
written.
written.
written.
written.
Format the memory card.
4-12
Corrective Action
Corrective Action
Corrective Action
Corrective Action
Indicators
Advertisement
Table of Contents
