Oce 1010N - B/W Laser Printer Operation Manual page 52

Printer Environment
3
Set the size of the RAM disk. Click RAM disk size. Set the size by
clicking the
the screen, or input the value directly into the combo box.
The maximum RAM disk value should be 9 MB less than the printer's
total memory. The default RAM disk value is 7 MB (16 MB minus 9 MB).
When the total memory size is 21 MB or more (144 MB max.), the RAM
Note
disk size on the Remote Operation Panel is factory-set to display 12 MB
regardless of the actual total memory, which can be set to the desired
RAM size (135 MB max) with the
4
After making settings, click the OK button to return to the start-up
screen.
5
Turn the printer's power off and on again to make the new setting
effective.
and buttons in the combo box on the right side of
button.
1-41
RAM disk size