Sending Prescribe Commands To The Printer - Oce 1010N - B/W Laser Printer Operation Manual

Other Settings
1.6.7

Sending PRESCRIBE Commands to the Printer

When the printer is connected to a network (TCP/IP), you can send Kyocera
Mita's PRESCRIBE printer language by broadcasting (Broadcast). You can
also use this menu to confirm and change the printer's internal settings,
when either in local or network connection (FRPO).
For details on PRESCRIBE commands and FRPO settings, refer to the
Programming Manual
Note
1
Click the MENU button on the start-up screen.
2
The Menu dialog box appears. Click Broadcast.
3
Click Broadcast to display the dialog box shown below.
provided on the CD-ROM supplied with the printer.
1-53
Broadcast
Broadcast
FRPO