Table of Contents
Advertisement
Glossary
Simple Network Management
Protocol (SNMP)
This is a protocol for the management of
networks that use TCP/IP (Transmission Control
Protocol/Internet Protocol).
Sleep mode
This mode is activated after a specified amount
of time elapses. The printer goes into economy
mode and a minimum amount of power is
consumed. You can change the amount of time
before the printer goes into sleep mode from the
Remote Operation Panel. The default setting is 5
minutes.
Status page
This lists printer conditions, such as the printer's
memory, the total number of copies printed, and
paper source settings. You can print the status
page by pressing the
key for 3 seconds or
more.
USB (Universal Serial Bus)
An interface standard for low to middle speed
serial interfaces. This printer supports USB
Revision 1.1. The maximum transfer rate is 12
Mbps and the maximum cable length is 5 meters
(16 feet).
E-4
Advertisement
Table of Contents
