Setting The Printer Driver - Oce 1010N - B/W Laser Printer Operation Manual

Expansion Memory Installation

Setting the Printer Driver

After you install the additional memory to the printer, follow the
instructions below to set the printer driver so that the printer can use the
memories efficiently.
1
Click the Windows Start button, point to Settings then click Printers.
2
Right click the Kyocera Mita FS-1010 KX icon, and click Properties.
The Properties dialog box will open. Click the Device Settings tab.
3
Enter the total memory size installed to the printer (up to 144 MB)
in the Memory box.
B-7