Km-Net Remote Operation Panel Utility; Requirements - Oce 1010N - B/W Laser Printer Operation Manual

KM-NET Remote Operation Panel Utility

1.2 KM-NET Remote Operation Panel Utility
1.2.1

Requirements

The KM-NET Remote Operation Panel utility is provided on the Kyocera
Mita Digital Library CD-ROM supplied with the printer. You can install the
KM-NET Remote Operation Panel on a computer that runs under Windows
95/98/Me or Windows NT 4.0/2000 operating systems, and use it to change
basic printer settings, monitor the current printer status, and display error
messages (such as paper jam warnings) on the computer screen.
The Remote Operation Panel utility is designed to run under Windows 95/
98/Me or Windows NT 4.0/2000 operating systems. With Windows 95/98/
Me it can be used with either local (parallel or serial) or network (TCP/IP
or IPX/SPX) connection. With Windows NT 4.0/2000 it can only be used
over a network.
• The Remote Operation Panel utility does not run under any other
operating systems.
• The Remote Operation Panel utility provided on the Kyocera Mita
Note
Digital Library CD-ROM supplied with the printer is for use only with
the Kyocera Mita FS-1010 KX printer driver. Printing problems may
occur if it is used in combination with any other printer driver.
1-7