Data Restoration; Single-Box Solution; Distributed Solutions - VMware VCENTER APPLICATION DISCOVERY MANAGER 6.1.1 Administration Manual

Restoring WinApe Migration Files
N Backup your ADM environment as described in "Backing Up WinApe Migration Files" on page 46.
OTE
The following procedures describes the restoration of WinApe migration files.
1 Log in to the WinApe appliance.
2 Copy the adkbcustom.jar backup file.
3 Navigate to the \lib folder.
4 Replace the current file in \lib folder with the copied file.
5 Run the services.msc command.
6 Restart the service VMware vCenter ADM Windows Collector.

Data Restoration

This section provides information about data restoration for Single‐Box, distributed, and distributed with
remote database solution.

Single-Box Solution

1 Restore the ADM database as described in "Restoring an ADM Environment by Using a Product Support
Package" on page 36.
2 Restore the custom discovery and configuration files as described in "Restoring the Custom Discovery
and Configuration Files" on page 37.
3 For WinApe, first create the backup as described in "Backing Up WinApe Migration Files" on page 46 and
then restore it as described in "Restoring WinApe Migration Files" on page 47.

Distributed Solutions

These steps apply to distributed solutions without a remote database. Perform the following steps on all
appliances in the following order: Collectors, WinApe, and Aggregator.
Collectors
Repeat the following steps for each Collector appliance:
1 Log in to the Collector virtual appliance.
2 Restore the custom discovery and configuration files as described in "Restoring the Custom Discovery
and Configuration Files" on page 37.
WinApe
Repeat the following steps for each Windows appliance:
1 Log in to the WinApe appliance.
2 Backup the WinApe migration files as described in "Backing Up WinApe Migration Files" on page 46.
3 Restore the WinApe migration files as described in "Restoring WinApe Migration Files" on page 47.
VMware, Inc.
Chapter 7 Migrating to a New Appliance
47