3
Setting Up ADM
This chapter provides information for setting up the ADM virtual appliance deployments. This chapter
includes the following topics.
"Process" on page 23
"Post‐Installation Steps" on page 27
Process
After the ADM appliance is deployed on the ESX Server, perform the following procedures:
"Order of Setup" on page 23.
"ADM Setup Procedures" on page 23
"Configuring the Root Password" on page 24
"Configuring Static Network Settings" on page 25
N
ADM only supports using a static IP address for the ADM virtual machine.
OTE
"Configuring the Appliance Role" on page 26
"Uploading a License" on page 40
Order of Setup
Repeat the setup procedures for all ADM components in the following order for all virtual appliances:
1
Database (where remote database is used)
2
Aggregator
3
Collectors (Passive, Active and Passive Collector)
The Windows Collector is set up as described in "Installing Windows Collector" on page 20.
ADM Setup Procedures
Before you begin ensure that you have performed the following.
1
Ensure all relevant components are deployed as described in "Deploying the Virtual Appliances" on
page 18.
2
Obtain the required information for each appliance deployed in Step
in Table
3‐1.
VMware, Inc.
1 and record these values as shown
3
23