VMware VCENTER APPLICATION DISCOVERY MANAGER 6.1.1 Administration Manual page 37

12 Exit from the nlayers user.
13 Type the following adm_control.pl command to start the services:
/home/nlayers/Seneca/Control/bin/adm_control.pl --start all
N If the ADM configuration being restored has custom configuration files or fingerprints, you must
OTE
complete the steps outlined in "Restoring the Custom Discovery and Configuration Files" on page 37.
Restoring the Custom Discovery and Configuration Files
ADM custom configuration files contain restore information for Passive Discovery custom fingerprints,
Passive Discovery custom configuration, Detail Discovery custom fingerprints, and Detail Discovery custom
configuration.
To restore the custom discovery and configuration files
1 Log in to the Collector or Single‐Box setup as user root.
I For distributed solutions only: The custom files must reside on the Collector appliance. In
MPORTANT
this case complete the following steps on each Collector in the deployment.
If the feature can be customized, the ./custom/* directory contains the files. If the directory is empty, no
customization files are associated with the feature.
2 Create a temporary directory:
mkdir supportpackagedir
3 Copy the support package into the temporary directory you created in Step
4 Extract the support package into the temporary directory:
unzip support_package__version_date_and_timestamp.zip
where version_date_and_timestamp is the unique identifier of the package.
5 When prompted for the password, type the password you retrieved from VMware Customer Support.
6 Copy all files from:
supportpackagedir/supportpackage/listener/custom/conf
7 Place the copied files to:
/home/nlayers/Seneca/probe
8 Copy all files from:
supportpackagedir/supportpackage/listener/custom/kb
9 Place the copied files to:
/home/nlayers/Seneca/probe/resources
10 Copy all files from:
supportpackagedir/supportpackage/active_discovery/custom/conf
11 Place the copied files to:
/home/nlayers/Seneca/ActiveProbe/conf
12 Change directory to:
/home/nlayers/Seneca/management/APIs
13 Type the following command:
./InSight_control.sh adkb --checkout /tmp
14 Copy all files and subdirectories from:
supportpackagedir/supportpackage/active_discovery/custom/kb/custom
VMware, Inc.
Chapter 5 Maintenance
2.
37