When A Package Is Created, Signed, Saved As Project, And Then Generated, The Package Is No Longer Signed; The Installed Size Of The Application Is Set To Nnn, But Systems With Nnn Run Out Of Space During Installation; The Package Installs The Application But Does Not Uninstall; Files Are Added To The Project Data Directory, But They Are Not Displayed In The List - VMware VCM 5.3 Troubleshooting Manual

When a package is created, signed, saved as project, and then generated,
the package is no longer signed
Possible Cause
By design, only generated packages
are signed.
The installed size of the application is set to nnn, but systems with nnn run
out of space during installation
Possible Cause
The assigned value nnn is the installed
size, not the size required to unpack,
download, and install the package
contents.

The package installs the application but does not uninstall

Possible Cause
The Removal options have not been
configured in the package.
Files are added to the Project Data Directory, but they are not displayed in
the list
Possible Cause
Display needs to be refreshed.
VMware, Inc.
Remediation
Generate the package before signing it.
Remediation
Set the installed size to the amount of space required to
install the package, even if the actual installed size is
smaller.
Remediation
On the Manage Packages | Files tab, select Removal in
the Installation/Removal drop-down list, and then
configure any necessary Pre-Command, Commands,
Arguments, and Post-Command options.
Remediation
Click the Refresh Files List button.
Software Provisioning Troubleshooting
31