Call Screening - Binatone iDECT Q2i System User Manual

4. Press the following keys to operate the answering machine remotely.
Keys Functions
While message is not playing
2 Delete the current message playback
4 Repeat playing the current message from the
beginning. Press twice to skip backward to
play the previous message.
5 Play the message Stop the current message playback
6 Skip to play the next message
7 Turn on the answering machine
8 Stop the current message playback
9 Turn off the answering machine
* Enter the 4-digit remote access PIN
Note: If your answering machine is switched off, the phone will enter into the remote
access mode after 10 rings. You can then enter the 4-digit remote access PIN (Default
Remote Access PIN is 0000) to activate the remote access feature.
When your answering machine memory is full and the answer mode is in Answer &
Record the answer mode will change to Answer Only automatically. It will change to
Answer & Record mode automatically after some messages have been deleted.
9 .5.9

Call Screening

When the answering machine is on and takes a call, you can listen to the caller leaving a
message. You can then identify the caller and decide whether to take the call in person.
If the answering machine is set to ON, when there is an incoming message, the handset
will display "Screen?"
1. Press <OK> to start call screening. The handset who picks up the call can listen. You
can listen to who is leaving the message and decide whether to pick up the call or not.
2. The handset will display "Screening".
3. You can adjust the speaker volume by pressing <UP or DOWN>.
OR
3. Press <Back> to return to previous screen and you cannot hear the recording.
At any time if you want to pick up the call, you can press <PickUp> or <TALK ON> and
the message recording will be stopped automatically. If the answering machine is in the
process of recording, the message already stored will be saved.
While message is playing
27