Turn On Or Off The Auto Answer; Set The Call Barring; Select Base Station; Set The Sos Number - Binatone iDECT Q2i System User Manual

3. Press <Select> and <UP/DOWN> to scroll to your desired contrast level (5
contrast levels are provided). The respective contrast effect
will display while browsing the contrast level list
4. Press <Select> to confirm the contrast setting.
8.1.7

Turn on or off the auto answer

1. Press <Menu> and <UP/DOWN> to scroll to HS Settings
2. Press <Select> and <UP/DOWN> to scroll to Auto Answer .
3. Press <Select> and <UP/DOWN> to scroll to On or Off.
4. Press <Select> to confirm your Auto Answer setting.
8.1.8

Set the call barring

Your phone can set to disable external outgoing calls according to up to four barring nu
If call barring is activated, internal calls and conference calls are still available.
8.1.8.1 Turn call barring on or off
1. Press <Menu> and <UP/DOWN> to scroll to HS Settings .
2. Press <Select> and <UP/DOWN> to scroll to Call Barring .
3. Press <Select> and enter the 4-digit system PIN (Default 4-digit system PIN: 0000)
Note: If the PIN code is entered incorrectly, "PIN Invalid" will display.
4. Press <OK> to confirm the PIN.
5. Press <UP/DOWN> to scroll to Barring Mode .
6. Press <Select> and <UP/DOWN> to scroll to On or Off.
7. Press <Select> to confirm your Call Barring setting.
Note: If Barring Mode is set to On, " Call Barred" will display in idle.
8.1.8.2 Set the call barring number
1. Follow steps 1 to 4 in Section 8.1. .1 8
2. Press <UP/DOWN> to scroll to Call Barring .
3. Press <UP/DOWN> to scroll to Barring Numbers .
4. Press <Select> and <UP/DOWN> to scroll to Bar Number 1/2/3/4
5. Press <Select> and enter the number for the selected Bar Number
Note: Each barring number can include up to 4 digits including "*" and "#".
Press <Clear> to delete a digit or press
and hold <Clear> to delete the whole barring number.
6. Press <OK> to confirm the number to be barred.
Note: If Barring Mode is set to On and Barring Number is programmed with at least
one number, your handset will check the first 4 digits of your dialing number with
the programmed barred numbers. If the dialing number matches with any one of
the set barred numbers, "Call Barred" will display.
8.1.9

Select base station

If your handset is registered to more than one base station, you can select
which base station to use.
1. Press <Menu> and <UP/DOWN> to scroll to HS Settings.
2. Press <Select> and <UP/DOWN> to scroll to Select Base.
3. Press <Select> and <UP/DOWN> to select your desired base station.
Note: An " * " is marked at the end of the currently used base.
4. Press <Select> to confirm.
Note: If the selected base is found successfully, "Saved" will display, otherwise,
"Failed" will display.

8.1.10 Set the SOS number

This function allows you to enter a number which is permitted to be called
even when the call barring function is enabled. The maximum length of SOS
number is 4 digits.
1. Press <Menu> and <UP/DOWN> to scroll to HS Settings.
2. Press <Select> and <UP/DOWN> to scroll to SOS Number.
3. Press <Select> and you are requested to enter the 4-digit system PIN.
(Default 4-digit system PIN is 0000).
.
.
.
19