Making And Answering Calls; To Make A Call; To Answer A Call; To End A Call - Binatone e900 System User Manual

Color profile: Generic CMYK printer profile
Composite Default screen

Making and answering calls

To make a call

1
Key in the telephone number
If you make a mistake, press the HANG UP/C
button to clear digits one by one from the display.
2 Press the PHONE button
(You can dial the number after you press the
PHONE button to get Dial tone if you prefer,
but you won't be able to correct any mistakes
if you do it this way.)
If you want to use the Indirect Network
feature, turn to page 32 for more information.
When there's an incoming call, call flashes on the
To answer a
call display; and the base unit and handset ring (the
handset rings softly at first, then gets louder).
◗
Press any button to answer the call
◗

To end a call

Press the HANG UP/C button so that the
PHONE light on the base unit goes out
◗
Or simply replace the handset on the base
unit or charger pod
Earpiece During a call, to adjust the volume in the earpiece:
volume
◗ L
Press the
There are three volume levels, shown by bars
on the right-hand side of the display. After you
end your call, the earpiece volume will stay at
the level you have set.
8
E:\Binatone2003\e3300\e3300_07.vp
11 March 2003 10:11:56
M
or button