Table of Contents
Advertisement
4
USING YOUR PHONE
4.1
Make a Call
4.1.1 Preparatory Dialling
Enter the phone number and press <TALK ON> to connect to the line and dial the
number. When entering the number, if you make a mistake, press <C/MUTE> to
delete digits.
4.1.2 Direct Dialling
Press <TALK ON> to connect to the line and then enter the phone number.
(Note: if you enter a wrong digit you cannot correct it with the <C/MUTE> key.)
4.1.3 Call from the phonebook
Press <PHONEBOOK> to access the phonebook and press <UP>/<DOWN> to select
the desired phonebook entry.
Press <TALK ON> to dial out the selected entry.
Note: The alphanumeric keys provide a short-cut to nd entries beginning with the
corresponding letters.
4.1.4 Call from the Call List (only available with Caller Display)
Press <UP>(Calls) to access the Call List and press <UP>/<DOWN> to select the
desired Call List entry.
Press <TALK ON>to dial out the selected entry.
Note: You can also access the Call List by pressing <MENU/OK> twice.
4.1.5 Call from the redial list
Press <DOWN>(Redial) to access the redial list and press <UP>/<DOWN> to select
the desired number.
Press <TALK ON>to dial out the selected redial number.
4.1.6 Call timer
Your handset automatically times the duration of every call.
The call timer is displayed as soon as you answer a call or 15 seconds after dialling
and remains on the screen for 5 seconds after the end of the call.
It is shown in hours, minutes and seconds format (HH:MM:SS).
4.2
Answer a Call
If the handset is not on the charging cradle, or if AUTO ANSWER is set to OFF:
When the phone rings, press <TALK ON> to answer the call.
Note: If AUTO ANSWER is set to ON, lift the handset off the base or charger to
answer the call automatically, without pressing buttons.
4.3
End a Call
During a call press <TALK OFF> to end the call.
OR
Put the handset on the base station or charger to end the call.
10
Hide quick links:
Advertisement
Table of Contents
