Reset Handset Settings To Default; Base Settings; Set The Base Ringer Melody; Set The Ringer Volume - Binatone iDECT Q2i System User Manual

4. Enter the system PIN.
5. Press <OK> to confirm the PIN.
Note: If the PIN code is entered correctly, the SOS number will be saved and "Saved"
will display. If the PIN code is entered incorrectly, "PIN Invalid" will display.
6. Press <UP/DOWN> and <Select> to select SOS Number 1/2/3.
7. Enter the SOS number.
8. Press <OK> to confirm.
8 . 1 . 1 1

Reset handset settings to default

You can reset your phone to its original default settings. After reset, all your personal
settings will be deleted, but your phonebook, call list and redial list entries remain
unchanged.
1. Press <Menu> and <UP/DOWN> to scroll to HS Settings.
2. Press <Select> and <UP/DOWN> to scroll to HS Default.
3. Press <Select> and enter the 4-digit system PIN (Default 4-digit system PIN:0000) .
4. Press <OK> to confirm the PIN.
5. Press <OK> to confirm the handset default.
Note: If the PIN code is entered correctly and is confirmed to restore the HS settings to
default settings. If the PIN code is entered incorrectly, "PIN Invalid" will display.
8.2

Base Settings

8.2.1

Set the Base Ringer Melody

1. Press <Menu> and <UP/DOWN> to scroll to Base Settings.
2. Press <Select> and <UP/DOWN> to scroll to Ring Setup.
3. Press <Select> and <UP/DOWN> to scroll to Ring Melody.
4. Press <Select> and <UP/DOWN> to scroll to the desired ringer melody (a total of 5 melodies
for your selection)
Note: The respective ringer melody will be played while browsing the melody list.
5. Press <Select> to confirm.
8.2.2

Set the Ringer Volume

1. Press <Menu> and <UP/DOWN> to scroll to Base Settings.
2. Press <Select> and <UP/DOWN> to scroll to Ring Setup.
3. Press <Select> and <UP/DOWN> to scroll to Ring Volume.
4. Press <Select> and <UP/DOWN> to scroll to the desired ringer volume (a total of 6 ringer
volume levels including Volume Off).
Note: The respective ringer volume will be played during your selection.
5. Press <Select> to confirm.
8.2.3

De-register a Handset

You are requested to enter the 4-digit PIN in order to de-register a handset from
the base station. The antenna icon on the de-registered handset will be flash.
Note: You cannot de-register the handset that you are currently using.
1. Press <Menu> and <UP/DOWN> to scroll to Base Settings
.
2. Press <Select> and <UP/DOWN> to scroll to Delete HS
.
3. Press <Select> and you are requested to enter the 4-digit system PIN.
4. Enter the 4-digit system PIN.
5. Press <OK> and a list of all registered handsets is displayed.
6. Press <UP/DOWN> to select one of the handsets that you want to de-register.
Note: If handset de-registration is unsuccessful, "Invalid HS" will display.
7. Press <Select> to confirm the handset de-registration.
Note: If handset de-registration is successfully done, " HS Deleted" will display.
20