Summary of Contents for Binatone BIG BUTTON 510 SYSTEM
Page 1
ACCESS TO DIAL EMERGENCY SERVICES. Before operating this set, Ver. 1, Mar, 05 please read these instructions carefully. BINATONE “ Big Button 510 System ” BINATONE “ Big Button 510 System ” User Guide - Front Page User Guide - Back Page...
If you need help … The Binatone Help Line is available from 9.00 am to 5.00 pm, Monday to Friday, on 0845 345 9677 Calls are charged at Local Call rate.
Color profile: Generic CMYK printer profile Composite Default screen Where to find it and DOWN buttons Press during a call to adjust the volume in the earpiece. HANG UP / C (Cancel) button Press to move through the list of stored Press to hang up at the end of a call.
Battery the base unit or charger pod as soon as possible, to charge the charge batteries. While the batteries are being charged, this symbol level blinks. Binatone Help Line: 0845 345 9677 (Local Call rate) E:\Binatone2005\BigButton510\BigButton510_01.vp 27 February 2005 16:59:06...
Color profile: Generic CMYK printer profile Composite Default screen Contents Read these notes first Caller Display Choosing a site for the base unit and To check Caller Display records 14 charger pod 4 To return a call 15 Radio signals between handset and To delete Caller Display records 15 base unit 4 To store a Caller Display number in...
Page 6
4 — otherwise, one or more of them may not ring and/or answer calls correctly. The Big Button 510 has a REN of 1, and most other telephones have a REN of 1 unless marked otherwise. Binatone Help Line: 0845 345 9677 (Local Call rate) E:\Binatone2005\BigButton510\BigButton510_01.vp...
Color profile: Generic CMYK printer profile Composite Default screen Read these notes first Choosing a site The base unit and charger pod(s) should be placed on a for the base level surface, in a position where: unit and the mains adapter plug will reach an easily accessible charger pod 230-V switched mains supply socket —...
Plug the mains adapter into a 230 V AC, 50 Hz mains socket, with the switch on the socket set to OFF See the note on page 4 Switch on at the mains socket(s) Binatone Help Line: 0845 345 9677 (Local Call rate) E:\Binatone2005\BigButton510\BigButton510_01.vp 27 February 2005 16:59:08...
Page 9
Color profile: Generic CMYK printer profile Composite Default screen Fit the rechargeable batteries in each handset . Fit the three B. Fit the batteries as battery shown, making compartment sure you match cover, sliding it – ends into place and to the markings pressing firmly in the battery...
Move nearer to the base unit within 20 seconds, until the tone stops. Otherwise, your call may be cut off. Binatone Help Line: 0845 345 9677 (Local Call rate) E:\Binatone2005\BigButton510\BigButton510_01.vp...
Color profile: Generic CMYK printer profile Composite Default screen Switching on and off To switch the To switch the handset off and save battery handset on power: and off Press the HANG UP/C button and hold it for 3 seconds until the display goes blank To switch the handset back on: Briefly press the HANG UP/C button To lock the...
There are three volume levels, shown by bars on the right-hand side of the display. After you end your call, the earpiece volume will stay at the level you have set. Binatone Help Line: 0845 345 9677 (Local Call rate) E:\Binatone2005\BigButton510\BigButton510_01.vp 27 February 2005 16:59:11...
Color profile: Generic CMYK printer profile Composite Default screen Making and answering calls Last Number To make a repeat call to the last number you Redial (LNR) dialled (up to 24 digits): Press the Redial/CDS button Press the PHONE/OK button To make a repeat call to one of the the last five numbers you dialled: Press the Redial/CDS button...
(01 to 20) using the numbered keys Press the PHONE/OK button Binatone Help Line: 0845 345 9677 (Local Call rate) E:\Binatone2005\BigButton510\BigButton510_01.vp 27 February 2005 16:59:11...
Color profile: Generic CMYK printer profile Composite Default screen Memory dialling Chain dialling You can store part of a number (for example, the long- distance dialling code) in memory, and use any com- bination of memory and manual dialling to make a call. To change a Press the PROG button stored...
(only free locations are displayed). Press the PHONE/OK button to store the number Binatone Help Line: 0845 345 9677 (Local Call rate) E:\Binatone2005\BigButton510\BigButton510_01.vp 27 February 2005 16:59:12...
Color profile: Generic CMYK printer profile Composite Default screen Caller Display If you subscribe to this feature from your service provider, you can see the phone numbers of your callers on the display, before you answer. If a caller withholds their number by dialling 141, or if they are calling from a network that does not transmit the number, no number will be shown on the display when the phone rings.
You can press the button to select a different free location if you wish (only free locations are displayed). Press the PHONE/OK button to store the number Binatone Help Line: 0845 345 9677 (Local Call rate) E:\Binatone2005\BigButton510\BigButton510_01.vp 27 February 2005 16:59:12...
Color profile: Generic CMYK printer profile Composite Default screen Using a multi-handset system If you have an Big Button 510 multi-handset system, you already have up to six handsets registered to your base unit. You can register additional handsets — altogether, up to six handsets per base unit.
If the user hasn’t answered after 30 seconds, the outside call will come back to you and your handset will ring. Binatone Help Line: 0845 345 9677 (Local Call rate) E:\Binatone2005\BigButton510\BigButton510_01.vp 27 February 2005 16:59:12...
Color profile: Generic CMYK printer profile Composite Default screen Using a multi-handset system To shuttle When you have both an outside call and an between two intercom call in progress, you can shuttle from calls one to the other, like this: Press the Ø/INT button for one second to speak to each in turn, putting the other on hold...
Handsets ring for up to 30 seconds. To stop the ringing before this time: Press the HANDSET LOCATOR button again OR press any button on any handset Binatone Help Line: 0845 345 9677 (Local Call rate) E:\Binatone2005\BigButton510\BigButton510_01.vp 27 February 2005 16:59:12...
Page 23
Color profile: Generic CMYK printer profile Composite Default screen Using a multi-handset system To register a The handset(s) supplied with your base unit should not new handset need to be registered; only additional ones you have to your base bought separately. unit Each handset can be registered to up to four base units, numbered 1 to 4.
Base units are numbered 1 to 4. If you select 0, your handset will automatically select the base unit that gives the strongest connection. Press the PHONE/OK button to confirm Binatone Help Line: 0845 345 9677 (Local Call rate) E:\Binatone2005\BigButton510\BigButton510_01.vp 27 February 2005 16:59:13...
(for example, steps 2 to 5 on page 20). If you need to enter a PIN code for the base unit, refer to the base unit’s User Guide. If you have problems, contact the Binatone Help Line for more advice. E:\Binatone2005\BigButton510\BigButton510_01.vp 27 February 2005 16:59:13...
Press the PROG button then 1 5 Use the button to set: 0 for auto-answer off 1 for auto-answer on Press the PHONE/OK button to confirm Binatone Help Line: 0845 345 9677 (Local Call rate) E:\Binatone2005\BigButton510\BigButton510_01.vp 27 February 2005 16:59:13...
Color profile: Generic CMYK printer profile Composite Default screen Customising your handset Ringer volume The handset has eight ringer volume levels, including 0 and melody for off; and eight ringer melodies. With the volume set to 0, the handset will not ring for an incoming call, but the display will show call or the phone number.
1 for Direct Call on Press the PHONE/OK button to confirm While Direct Call is turned on, the display shows the Direct Call number. You can answer calls as normal. Binatone Help Line: 0845 345 9677 (Local Call rate) E:\Binatone2005\BigButton510\BigButton510_01.vp 27 February 2005 16:59:13...
Color profile: Generic CMYK printer profile Composite Default screen Customising your handset To clear all This is a way of clearing all stored numbers at memories once, from the memory locations and the Last Number Redial memories. If you have set a Direct Call number, it will be cleared too.
Key in the first emergency number Press the PHONE/OK button to confirm Press 2 3 2 Key in the second emergency number Press the PHONE/OK button to confirm Binatone Help Line: 0845 345 9677 (Local Call rate) E:\Binatone2005\BigButton510\BigButton510_01.vp 27 February 2005 16:59:13...
Color profile: Generic CMYK printer profile Composite Default screen Customising your base unit Ringer volume The base unit has eight ringer volume levels, including and melody 0 for off; and eight ringer melodies. With the volume set to 0, the base unit will not ring for an incoming call. To change the volume: Press the PROG button then 2 1 1 ...
Page 32
Press 0 then use the button to set: 0 for call barring OFF 1 for call barring ON Press the PHONE/OK button to confirm Binatone Help Line: 0845 345 9677 (Local Call rate) E:\Binatone2005\BigButton510\BigButton510_01.vp 27 February 2005 16:59:13...
Color profile: Generic CMYK printer profile Composite Default screen Customising your base unit To turn barring of certain types of call ON and OFF Press the PROG button then 2 2 1 Key in the handset number (1 to 6) ...
Color profile: Generic CMYK printer profile Composite Default screen Indirect Network You can use this feature if you make some of your calls via a different network from the one that supplies your exchange line. By using indirect access to an alternative network, you may be able to save money on long- distance and international calls.
Page 36
Note — for Indirect Network to work, you must dial the phone number (or select it from memory, LNR memory or Caller Display memory) before you press the PHONE/OK button for an outside line. Binatone Help Line: 0845 345 9677 (Local Call rate) E:\Binatone2005\BigButton510\BigButton510_01.vp 27 February 2005 16:59:14...
Color profile: Generic CMYK printer profile Composite Default screen Troubleshooting The Big Button 510 must be serviced by trained engineers. NEVER attempt any repairs or adjustments yourself — you could make the problem worse and invalidate the Guarantee. ALWAYS check you have followed all the steps listed on pages 5 and first that: 6 to install and set up your Big Button 510...
Page 38
Check that the total REN value of all equipment connected to your telephone line is no more than 4 (see page 3). Disconnect one or more telephones and see whether that helps. Binatone Help Line: 0845 345 9677 (Local Call rate) E:\Binatone2005\BigButton510\BigButton510_01.vp 27 February 2005 16:59:14...
Page 39
Color profile: Generic CMYK printer profile Composite Default screen Troubleshooting “My call was cut Move the handset closer to the base unit before you try again to make a call. off when I went out of range. Now I can’t use my handset.”...
Page 40
“I try to You need to replace the batteries. To find out how to recharge the obtain replacements, call the Binatone Spares batteries, but I Department on 0845 345 9677, between 9.00 am and still get a 5.00 pm, Monday to Friday.
Page 41
Color profile: Generic CMYK printer profile Composite Default screen Troubleshooting Indirect Network “The Indirect You must subscribe to an alternative network provider before you can use this feature. Network feature isn’t working.” If you have more than one registered handset, you need to turn the feature on for each one individually, as well as setting the network access code on the base unit.
Page 42
Contact the service provider (the BT engineers on 151, or your cable company). If you still cannot identify the cause of the problem, contact the Binatone Help Line on 0845 345 9677. Binatone Help Line: 0845 345 9677 (Local Call rate) E:\Binatone2005\BigButton510\BigButton510_01.vp...
Big Button 510. However, if something does go wrong, please do not try to repair it yourself — consult your supplier or the Binatone Help Line. Declaration of conformity The Binatone Big Button 510 complies with the essential protective requirements and objectives of: EC R&TTE Directive 1999/5/EC...
Composite Default screen Guarantee and service The Binatone Big Button 510 is guaranteed for 12 months from the date of purchase shown on your sales receipt. The Guarantee does not cover damage by misuse or negligence, or by excessive voltages — for example, faults on the telephone line, or lightning.
Color profile: Generic CMYK printer profile Composite Default screen Technical details Standard Digital Enhanced Cordless Telecommunications (DECT) Frequency range 1.88 to 1.9 GHz (bandwidth = 20 MHz) Channel bandwidth 1.728 MHz Operating range up to 300 m outdoors; up to 50 m indoors Operating time standby: 100 hours approx.
12, 26 notebook, 13 date and time setting, 30 storing and dialling de-registering handsets, 21 numbers, 11 Direct Call, 25 multi-handset use, 16–22 earpiece volume, 9 Binatone Help Line: 0845 345 9677 (Local Call rate) E:\Binatone2005\BigButton510\BigButton510_01.vp 27 February 2005 16:59:15...
Page 47
Color profile: Generic CMYK printer profile Composite Default screen Index New Call tone, 19 notebook, 13 ‘Out of range’ warning, 7 paging handsets, 19 pause, 38, 42 PBX compatibility, 42 problems, 34–39 radio signals, 4, 8 recall type, 42 registering handsets, 20, REN (ringer equivalence number), 3 resetting the base unit, 31...
Page 48
Color profile: Generic CMYK printer profile Composite Default screen Waste electrical products must not be disposed of with household waste. This equipment should be taken to your local recycling centre for safe treatment. E:\Binatone2005\BigButton510\BigButton510_01.vp 27 February 2005 16:59:16...