Settings; Handset Settings; Set The Internal Ringer Melody; Set The External Ringer Melody - Binatone iDECT Q2i System User Manual

8

SETTINGS

Your phone comes with a selection of settings that you can change to personalise
your phone operation.

8.1 Handset Settings

8.1.1

Set the internal ringer melody

In Idle mode:
1. Press <Menu> and <UP/DOWN> to scroll to HS Settings .
2. Press <Select> and <UP/DOWN> to scroll to Ring Setup .
3. Press <Select> and <UP/DOWN> to scroll to Internal Ring .
4. Press <Select> and <UP/DOWN> to scroll to your desired internal ringer melody
(10 ringer melodies and 5 standard tones are provided).
Note: The respective ringer melody will be played while browsing the melody list.
5. Press <Select> to confirm your internal ringer melody .
8.1.2

Set the external ringer melody

1. Press <Menu> and <UP/DOWN> to scroll to HS Settings.
2. Press <Select> and <UP/DOWN> to scroll to Ring Setup .
3. Press <Select> and <UP/DOWN> to scroll to External Ring
4. Press <Select> and <UP/DOWN> to scroll to your desired external ringer melod y (
10 ringer melodies and 5 standard tones are provided).
Note: The respective ringer melody will be played while browsing the melody list.
5. Press <Select> to confirm your external ringer melody.
8.1.3

Adjust the Ringer Volume

In Idle mode:
1. Press <Menu> and <UP/DOWN> to scroll to HS Settings.
2. Press <Select> and <UP/DOWN> to scroll to Ring Setup .
3. Press <Select> and <UP/DOWN> to scroll to Ring Volume
4. Press <Select> and <UP/DOWN> to scroll to your desired ringer volume level
from Level 1 to Level 5 or Ringer Off.
Note: The respective ringer volume will be played while scrolling through the volume
levels. If Volume Off is selected, the <Ringer Off> icon will be displaied in idle mode .
5. Press <OK> to confirm your ringer volume slection .
8.1.4

Set the alert tones

A single beep is emitted when you press a key. You can turn this key tone on or off.
You can also turn on the alert tones when low battery and out of range are detected.
1. Press <Menu> and <UP/DOWN> to scroll to HS Settings
2. Press <Select> and <UP/DOWN> to scroll to Tone Setup .
3. Press <Select> and <UP/DOWN> to scroll to Key Tone / Battery Low / Out of Range
4. Press <Select> and <UP/DOWN> to scroll to On or Off.
5. Press <Select> to confirm your alert tone setting .
8.1.5

Rename the handset

1. Press <Menu> and <UP/DOWN> to scroll to HS Settings .
2. Press <Select> and <UP/DOWN> to scroll to Rename HS
.
3. Press <Select> and then enter your new name for the handset.
Press <Clear> to delete the last character or press and hold
<Clear> to delete the whole character string.
Note: The handset name can be up to 12 characters long.
4. Press <OK> to confirm the new name .
8.1.6

Set the contrast level

1. Press <Menu> and <UP/DOWN> to scroll to HS Settings .
2. Press <Select> and <UP/DOWN> to scroll to Contrast .
18
.
.
.
.