Set The Recording Time Of Incoming Message; Call Screening - Binatone Concept Combo 3525 Twin User Manual

9.5.6

Set the Recording Time of Incoming Message

You can set the maximum length of the recording time of the incoming
messages.
1. Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.
2. Press <MENU/OK> and <UP/DOWN> to select TAM SETTINGS.
3. Press <MENU/OK> and <UP/DOWN> to select RECORD TIME.
4. Press <MENU/OK> and <UP/DOWN> to select your desired recording
time from the available options 60S, 120S, 180S or UNLIMITED. (The
current selection is marked with an asterisk.)
5. Press <MENU/OK> to confirm.
9.5.7

Call Screening

When the answering machine is on and takes a call, you can listen to the
caller leaving a message. You can then identify the caller and decide
whether to take the call in person. The call can be screened at the base.
9.5.7.1 Screening at the base
By default, answering machine calls are played automatically through the
base speaker and the volume can be adjusted with the VOL + and VOL -
keys on the base.
If you don't want the caller to be heard when leaving a message, the base
screening can be turned off.
1. Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE.
2. Press <MENU/OK> and <UP/DOWN> to select TAM SETTINGS.
3. Press <MENU/OK> and <UP/DOWN> to select BS SCREENING.
4. Press <MENU/OK> and <UP/DOWN> to select OFF or ON. (The
current setting will be indicated by a *.)
5. Press <MENU/OK> to confirm the setting.
53