Turn On Or Off The Base Screening; Activate Remote Access - Binatone iDECT Q2i System User Manual

9.5.7

Turn On or Off the Base Screening

You can select to turn on or off the call screening on base through the TAM Settings menu
under Answer Machine menu on your handset.
1. Press <Menu> and <UP/DOWN> to select Answer Machine.
2. Press <Select> and <UP/DOWN> to select TAM Settings.
3. Press <Select> and <UP/DOWN> to select Base Screening.
4. Press <Select> and <UP/DOWN> to select On or Off.
5. Press <Select> to confirm.
9 .5.8

Activate Remote Access

Your phone lets you check your messages, or otherwise operate your answering machine,
by calling the answering machine when you are away from home by entering a 4-digit
remote access PIN on a tone-dialing phone. Use the 4-digit remote access PIN code to
prevent other people from unauthorized access of your answering machine.
9 .5.8.1 Change the 4-Digit Remote Access PIN
1. Press <Menu> and <UP/DOWN> to scroll to Answer Machine.
2. Press <Select> and <UP/DOWN> to scroll to TAM Settings.
3. Press <OK> and <UP/DOWN> to scroll to Chg Remote PIN.
4. Press <Select> to enter the Old remote access PIN (Default Remote Access PIN is
0000).
Note: If the Old remote access PIN is incorrect, "Old PIN Invalid " is displayed and will
return to Chg Remote PIN menu.
5. Press <OK> to enter the new remote access PIN.
6. Press <Down> to enter the new remote access PIN again.
7. Press <OK> to confirm.
Note: If the new remote access PIN entered in Step 6 is not matched with the new remote
access PIN entered in Step 5, "New PIN Invalid " is displayed. User is requested to enter
the valid remote access PIN again in Step 5.
9.5.8.2 Activate or Deactivate the Remote Access
1. Press <Menu> and <UP/DOWN> to scroll to Answer Machine.
2. Press <Select> and <UP/DOWN> to scroll to TAM Settings.
3. Press <Select> and <UP/DOWN> to scroll to Remote Access.
4. Press <Select> and <UP/DOWN> to scroll to On or Off to turn the remote access on
or off, respectively.
5. Press <Select> to confirm your choice.
9.5.8.3 Access Your Answering Machine Remotely
You can ring your iDECT Q2i from another tone-dialing phone to switch the answering
machine on or off, or to listen to your messages remotely.
1. Place a call from a tone-dialing phone to your iDECT Q2i
2. When the answering machine answers the calls, press the <*> key while the OGM is
still playing.
Note: Enter the * while OGM is still playing and proceed the following in order to access
the answering machine remotely.
3. Enter the 4-digit Remote Access PIN. You will hear a tone if the PIN has been accepted.
Note: Press <*> key after OGM playback cannot access your answering machine
remotely. If the 4-digit Remote Access PIN is entered incorrectly three times
consecutively, the line will be released automatically.
26