Ringer Volume And Melody; Key Tone; Direct Call - Binatone E3300 Manual

Customising your handset
Ringer volume The handset has eight ringer volume levels, including 0
and melody for off; and eight ringer melodies. With the volume set
to 0, the handset will not ring for an incoming call, but
the display will show call or the phone number.
To change the volume:
1 Press the PROG button then 1 1 1
2 Use the
volume
3 Press the PHONE button to confirm
To change the melody:
1 Press the PROG button then 1 1 2
2 Use the
melody
3
Press the PHONE button to confirm

Key tone

Normally, whenever you press a button on the handset,
you hear a 'beep' tone. You can turn these tones off if
you prefer.
1
Press the PROG button then 1 1 3
2
Use the
0 for key tone off
1 for key tone on
3
Press the PHONE button to confirm
24
L M
or button to change the
L M
or button to change the
L M
or buttons to set:

Direct Call

With Direct Call turned on, when you press any key
except the PROG button, the handset will automatically
make a call to a number you have programmed in. This
feature is sometimes called babysitter's call.
With Direct Call turned on, it is not possible to make
!
emergency calls, unless you have programmed an
emergency number such as 999 as the Direct Call
number. But remember that the number you have
programmed will be dialled automatically when any
key is pressed.
Before you can turn Direct Call on, you must
program the telephone number.
1
Press the PROG button then 1 3
2 Key in the number
You can press the HANG UP/C button to clear
digits one by one; or press and hold the
HANG UP/C button to clear the Direct Call
number completely.
3
Press the PHONE button to confirm
To turn Direct Call on and off:
1 Press the PROG button then 1 2
2 Use the
0 for Direct Call off
1 for Direct Call on
3
Press the PHONE button to confirm
While Direct Call is turned on, the display shows
the Direct Call number. You can answer calls as normal.
Binatone Help Line: 01325 304 473
Customising your handset
L M
or buttons to set:
and
25