To Clear All Memories; To Reset The Handset - Binatone E3300 Manual

Customising your handset
To clear all This is a way of clearing all stored numbers at
memories once, from the memory locations and the Last
Number Redial memories. If you have set a
Direct Call number, it will be cleared too.
1 Press the PROG button then 1 9
2 Press the PHONE button to confirm
Note: Caller ID memories are cleared by
resetting the base unit (see page 31).
To reset the When you reset the handset, you return all its settings
handset to their defaults, as follows:
I
ringer volume
I
ringer melody
I
key tone
I
handset PIN
I
Indirect Network
I
auto-answer
I
select base unit
1 Press the PROG button then 1 0
2 Press the PHONE button to confirm
26
7
4
on
0000
off (see page 32)
off
automatic (best connection)
Customising your base unit
The base unit's The base unit has a default PIN of 0000. You can
PIN code change it to any four-digit number you'll remember
easily. If you leave it at the default, you won't need to
key it in to change the base unit's settings.
1
Press the PROG button then 2 8
2
Key in your chosen PIN
3
Press the PHONE button to confirm
If you forget your PIN, and you want to change
the base unit's settings, you'll need to reset the
base unit as described on page 31.
Emergency These two numbers can be dialled even when the
numbers handset is locked (see page 7).
1
Press the PROG button then 2 2 3 1
2 Key in the first emergency number
3 Press the PHONE button to confirm
4
Press the PROG button then 2 2 3 2
5
Key in the second emergency number
6
Press the PHONE button to confirm
Binatone Help Line: 01325 304 473 27