Date And Time; Memories; To Reset The Base Unit - Binatone E3300 Manual

Customising your base unit
To bar certain types of call
1 Press the PROG button then 2 2 1
2 Key in the handset number (1 to 6)
3 Use the
0
1
2
4 Press the PHONE button to confirm

Date and time

You need to set the date and time if they are to
be shown correctly on the handsets' displays
and stored with Caller Display records.
1
Press the PROG button then 2 3
2
Key in the date as a six-digit number
...for example, 131002 for 13 October 2002,
020303 for 2 March 2003.
3
Press the PHONE button to confirm
4
Key in the time as a four-digit number
...for example, 0830 for 8:30 am, 1406 for
2:06 pm.
5
Press the PHONE button to confirm
30
L M
or button to set:
no outside calls (intercom calls only)
no international calls
all calls allowed
To clear all This is a way of clearing all stored numbers
Caller Display from the Caller Display memories.

memories

1
Press the PROG button then 2 9
2
Press the PHONE button to confirm
To reset the When you reset the base unit, you return all its settings
base unit to their defaults, as follows:
I
ringer volume
I
ringer melody
I
key tone
I
base unit PIN
I
call barring
I
Caller Display memories
I
Indirect Network codes
1 Press the PROG button then 2 0
2 Press the PHONE button to confirm
Binatone Help Line: 01325 304 473
Customising your base unit
7
4
on
0000
none
empty
none (see page 32)
31