Table of Contents
Advertisement
Color profile: Generic CMYK printer profile
Composite
Default screen
Tones and volumes
Handset ringer
You have a choice of five ringing volume
volume
levels, or you can turn the ringer off altogether.
While the handset is idle (not busy on a call):
1
Press the VOLUME button briefly
u The display shows the current volume level
(1 to 5 ) as a number of small circles, and the
handset rings.
2
Press the
button briefly to change the volume
3
Press the VOLUME button again to confirm
Handset ringer
You have a choice of nine ringing melodies.
melody
While the handset is idle (not busy on a call):
1
Press the VOLUME button and hold it for
about 3 seconds
u The display shows
current ringer (1 to 9 )
2
Press the
button briefly to hear the different ringer
melodies
When you reach the melody you prefer:
3
Press the VOLUME button again to confirm
Base unit
To adjust the base unit's ringer volume, while it
ringer volume
is ringing:
◗
Press the VOLUME – or + buttons
28
E:\Binatone2003\S_2300\s2300_UK_draft02.vp
27 November 2003 19:50:06
(Caller Display) or
(R)
followed by the
(Caller Display) or
(R)
Multi-handset use
If you have a S2300 Twin or Quin system, you will
already have two or five handsets. You can also buy
spare handsets and charger pods separately.
Altogether, you can have up to five handsets
registered to the base unit, as numbers 2, 3, 4 and 5.
With more than one handset registered to your base
unit, you can:
■
make intercom calls from one handset to another
■
make a new intercom call while you are on an
outside call
■
shuttle between an outside call and an intercom call
■
transfer an outside call from one handset to another
■
set up a three-way conference call between
yourself, an outside call and an intercom call
Each handset has its own number — 1, 2, 3, 4 or 5 —
which is shown on the left-hand side of the display.
Please note
◆
Among the handsets registered to a single base unit,
only one outside call and two intercom calls can take
place at once.
◆
If you try to make an outside call while another handset
is already on the line, you will hear Busy tone.
◆
If you try to make an intercom call when one is already
in progress, you will hear Busy tone.
Binatone Help Line: 01325 304 473
29
Advertisement
Table of Contents
