Color profile: Generic CMYK printer profile
Composite
Default screen
Read these notes first
Choosing a site
The base unit and charger pod(s) should be placed on a
for the base
level surface, in a position where:
unit and
the mains adapter plug will reach an easily accessible
charger pod
230-V
switched mains supply socket — never try
AC
to lengthen the mains power cable
the base unit's telephone line cable will reach your
telephone line socket or extension socket (the charger
pod does not have a telephone line connection)
it is not close to another telephone — this can cause
radio interference
it is not close to a sink, bath or shower, or anywhere
else where it might get wet
it is not close to other electrical equipment — fridges,
washing machines, microwave ovens, fluorescent
lights, TVs etc.
Radio signals
To use your handset and base unit together, you must
between
be able to establish a radio link between them. Be
handset and
aware that:
base unit
Any large metal object — like a refrigerator, a mirror
or a filing cabinet — between the handset and the
base unit may block the radio signal.
Other solid structures, like walls, may reduce the
signal strength.
Mains power
IMPORTANT — The Big Button 510 base unit and
connection
charger pod must be used with the mains adapter
supplied with the unit. Using any other adapter will
result in non-compliance with EN60950, and will
invalidate any approval given to this apparatus.
Battery safety
Only use the rechargeable batteries supplied with the
handset. DON'T use non-rechargeable batteries — they
may burst, causing damage.
4
E:\Binatone2005\BigButton510\BigButton510_01.vp
27 February 2005 17:16:29