Binatone BIG BUTTON 510 SYSTEM User Manual page 23

Color profile: Generic CMYK printer profile
Composite Default screen
Using a multi-handset system
To register a The handset(s) supplied with your base unit should not
new handset need to be registered; only additional ones you have
to your base bought separately.
unit
Each handset can be registered to up to four base
units, numbered 1 to 4.
1
Press and hold the HANDSET LOCATOR
button on the base unit until you hear
Registration tone (slow 'beeps')
You now have 30 seconds in which to register
the handset.
2
On the handset, press the PROG button
then key in 1 6 followed by the base unit
number
If this is the first base unit you're registering to,
its number is 1.
3
Key in 0000 (the base unit's PIN
code)
4
Press the PHONE/OK button
The display shows the handset numbers which
are still free on the base unit.
5 (Optional) Key in a handset number
If you don't key in a number at this point, the
handset will be registered with the lowest free
number.
The handset beeps to confirm registration.
20
E:\Binatone2005\BigButton510\BigButton510_01.vp
27 February 2005 16:59:12