Binatone BIG BUTTON 510 SYSTEM User Manual page 42

Color profile: Generic CMYK printer profile
Composite Default screen
You can also set up your Big Button 510 so that it auto-
matically inserts a 2-second pause after you dial
the outside line access code, as follows:
1
Press the PROG button then 2 5 0
2 Key in the line access code (up to four
digits)
3 Press the PHONE/OK button to confirm
If the fault persists ...
Disconnect all other instruments connected to the
same line as the Big Button 510 and see whether you
can make a call.
Disconnect the base unit from the telephone line and
plug a different phone into the master telephone
socket. Try making a call. If this works, the line is OK.
If the call does not work, and you are using a two-way
socket adapter, remove it and plug a telephone
directly into the socket. If the call now works, the
adapter may be faulty.
If you cannot make a call, the fault may be on the
exchange line. Contact the service provider (the BT
engineers on 151, or your cable company).
If you still cannot identify the cause of the problem,
contact the Binatone Help Line on 0845 345 9677.
Binatone Help Line: 0845 345 9677
E:\Binatone2005\BigButton510\BigButton510_01.vp
27 February 2005 16:59:14
Troubleshooting
39
(Local Call rate)