Binatone BIG BUTTON 510 SYSTEM User Manual page 39

Color profile: Generic CMYK printer profile
Composite Default screen
Troubleshooting
"My call was cut Move the handset closer to the base unit before you try
again to make a call.
off when I went
out of range.
Now I can't use
my handset."
"There is inter- Move the handset closer to the base unit, or to a
different position.
ference and
noise on the
Try moving the base unit so that it's not near other
line."
electrical equipment, such as a television or a
computer.
You'll get the best results if you site the base unit as
high as possible. For example, in a two-storey house,
the first-floor landing is an ideal place for the base unit.
"I hear 'beeps' You may be going out of range of the base unit. Move
from my closer, or your call may be cut off.
handset while
Check the Battery Level symbol on the display. If it is
I'm on a call."
low, recharge the batteries.
"The Caller You need to subscribe to the Caller Display feature from
BT or your service provider.
Display feature
isn't working."
The caller may have withheld their number by dialling
141. Or they may be calling from a network that does
not transmit the Caller ID (for example, it may be an
international call).
"When I try to If you're using a Big Button 510 Twin system, or have
make a call, I extra handsets registered to your base unit, check that
hear Busy another handset isn't already in use on a call.
tone."
36
E:\Binatone2005\BigButton510\BigButton510_01.vp
27 February 2005 16:59:14