Where To Find It - Binatone BIG BUTTON 510 SYSTEM User Manual

Color profile: Generic CMYK printer profile
Composite Default screen

Where to find it

UP and DOWN buttons
Press during a call to adjust the volume in
the earpiece.
Press to move through the list of stored
numbers or Caller Display records.
PHONE /OK button
Press to begin or answer a
telephone call.
Press while programming to confirm
your selection.
PROG button
Press to start programming.
Press during a call to make a note
of a number in the Notebook.
(Last Number Redial)/
CDS/ PAUSE button
Press ONCE to make a repeat
call to one of the last five
numbers you dialled.
Press TWICE to see a list of
Caller Display records.
Press to generate pauses when
using the phone on a PBX.
/INT (Intercom) button
Press to make an intercom call
(if you have more than one
handset).
If the display is blank
Press the button to switch the handset on
E:\Binatone2005\BigButton510\BigButton510_01.vp
27 February 2005 16:58:00
HANG UP
Press to hang up at the end of a call.
Press and hold for 1 second to lock the keypad.
Press and hold for 3 seconds to turn the handset on and off.
While dialling or programming, press BRIEFLY to delete digits from
the display; or press and HOLD to clear the display.
R (Recall) button
You may need this during a call if your Big Button 510
is connected to a PBX, or if you use BT's Select Services.
MEMORY
Press to store numbers in memory and to make
calls to stored numbers.
IN USE light
This comes on when you have a connection to the telephone line.
HANDSET LOCATOR button
Press to make all registered handsets ring, (useful
if you've forgotten where you put a handset).
Ringer
SCROLL ( # ) buttons
When a long number (more
than 16 digits) is shown on
the display, press these to
scroll along the digits.
Before you can use the handset to make calls you
will need to fit and fully charge the batteries, as
described on pages 6 and 7.
Please read the notes on pages 3 and 4 before you
install the base unit.
/ C (Cancel) button
button