Binatone BIG BUTTON 510 SYSTEM User Manual page 9

Color profile: Generic CMYK printer profile
Composite Default screen
6
Fit the rechargeable batteries in each handset
A . Fit the three
batteries as
shown, making
sure you match
the + and – ends
to the markings
in the battery
compartment
DON'T use non-rechargeable batteries in the handset.
7 Charge the batteries for 15 hours
Before you use the handset for
the first time, it's important to
The battery
level symbol
charge the batteries fully.
blinks
The handset 'beeps' when it's
correctly in position on the
charging cradle.
Leave the handset on the charging cradle
for 15 hours.
The battery charge level symbol should increase
by one bar every half hour when you're charging
an empty battery. If you think that the symbol
isn't showing the correct battery charge level,
remove and refit the batteries.
8
Connect the base unit to the telephone line
Switch off power at the mains socket
Insert the telephone line plug into
the socket as shown
Switch mains power back on
Make sure the mains socket is
switched on if you want to use
the phone — it will not work
without electrical power
6
E:\Binatone2005\BigButton510\BigButton510_01.vp
27 February 2005 16:59:11
B. Fit the
battery
compartment
cover, sliding it
into place and
pressing firmly
to make sure it
is secure
The Charge
light comes on.
Use the plug to
raise the shutter
before pushing
it into the socket
NOTE: the charger pod does not have
a connection to the telephone line.