Bluetooth Setup; Setting The Bluetooth Connection (Bt In); Hands-Free Phone Setting (Hfp); Bluetooth Audio Setting (Audio) - Alpine CDE-W235BT Owner's Manual

BLUETOOTH SETUP

The following steps 1 to 5 are common to the various BLUETOOTH
functions. For details, refer to each individual function.
Note
• Set "HFP" or "AUDIO" to ON, and then perform BLUETOOTH
SETUP operation. Refer to "Setting the BLUETOOTH Connection
(BT IN)" on page 21.
1
Press and hold AUDIOSETUP for at least 2 seconds to
activate the SETUP mode.
2
Turn the Rotary encoder to select "BLUETOOTH", and then
press ENTER.
The BLUETOOTH setup mode is activated.
Note
• The BLUETOOTH setup mode can also be activated by pressing and
holding f for at least 2 seconds.
3
Turn the Rotary encoder to select the desired items and
then press ENTER.
BLUETOOTH:
*1
 PAIRED DEV  VISIBLE M
BT IN
*2
 SENDER ID
CALL SOUND
*2
 AUTO ANS
PB ORDER
FW VERSION  FW UPDATE
The items are not displayed during a phone call.
The items are not displayed if "HFP" is set to OFF. Refer to
"Setting the BLUETOOTH Connection (BT IN)" on page 21.
4
Turn the Rotary encoder to change the settings.
5
Press and hold AUDIOSETUP for at least 2 seconds.
The SETUP mode is canceled.
Notes
• Press  to return to the previous mode.
• Pressing and holding  for at least 2 seconds will return to normal
mode.
• If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
Setting the BLUETOOTH Connection
(BT IN)
With BLUETOOTH technology, you can place a hands-free call by a
BLUETOOTH-equipped mobile phone.
Audio information of a BLUETOOTH compatible mobile phone, a
portable audio player, etc., is controllable/playable wirelessly from this
unit.
 Setting item: BT IN
 Further setting items: HFP / AUDIO
Setting contents:
OFF / ON (Initial setting)
*1 *1
 SEARCH DEV 
*2 *2
 PB UPDATE 
*2 *2
 SEV NAME  SPEAKER SL
*1

Hands-Free Phone setting (HFP)

ON:
Select when you want to pair your BLUETOOTH compatible phone
with this unit.
OFF:
Hands-Free Phone function is not used.
Note
• When HFP is set to OFF, the indicators related to Hands-free phone
(c battery quantity, i signal strength and h message) will not
be displayed.

BLUETOOTH Audio setting (AUDIO)

ON:
Select when you want to use BLUETOOTH Audio function.
OFF:
BLUETOOTH Audio function is not used.

Setting the BLUETOOTH Device

Select one of 3 connected BLUETOOTH compatible devices that you
previously registered.
 Setting item: PAIRED DEV
1
Turn the Rotary encoder to select a BLUETOOTH
compatible device you want to use (you want to change
*2

connection), and then press ENTER.
2
Turn the Rotary encoder to select "CONNECT" to connect
the selected device.
The connected device is marked with "l". Select "DISCONNECT"
to disconnect this device. Select "CLEAR" when you want to clear
the device from the device list.
Notes
• If the connection is successfully changed, "CONNECTED" is displayed
for 2 seconds and the  indicator lights up, then the display returns to
the SETUP screen.
• If a mobile phone is connected to this unit successfully, the c
indicator lights up to show the battery quantity of the connected mobile
phone. The j indicator lights up when the battery quantity is in
middle level, and it blinks in low level.
• Indicator i (Signal Strength):
The indicator will display the current signal strength of mobile phone.
The indicator blinks when the signal of the connected mobile phone is
weak.
• Depending on the connected mobile phone, the c (battery
quantity), i (signal strength) and h (message) indicators may not be
displayed.
• If all the 3 positions have been registered, you cannot register the 4th
device. To register another device, you need to delete one of the devices
from position 1 to 3 first.
21
-EN