Setup; Setting; General Setting; Displaying The Time - Alpine CDE-W235BT Owner's Manual

SETUP

SOURCE/
/ENTER

Rotary encoder

Setting

You can flexibly customize the unit to suit your own preferences and
usage. From the SETUP menu, GENERAL Setting, DISPLAY Setting,
etc., can be modified.
Use steps 1 to 5 to select one of the SETUP modes to modify.
See the applicable section below for details about the
selected SETUP item.
1
Press and hold AUDIOSETUP for at least 2 seconds to
activate the SETUP mode.
2
Turn the Rotary encoder to select the desired item, and
then press ENTER.
(e.g. Select GENERAL)
*1
 GENERAL  DISPLAY  IPOD  BLUETOOTH
AUDIO
GENERAL:
*3
 CLOCK  CLOCK MODE  AUX SETUP 
CLOCK ADJ
*4
 PLAY MODE  DEMO
AUX NAME
DISPLAY:
DIMMER  SCROLLTYPE
iPod:
IPOD LIST
Refer to "Audio Setup" on page 13.
Refer to "BLUETOOTH SETUP" on page 21.
Refer to "Setting Time" on page 8.
Displayed only when AUX SETUP is set to ON.
3
Turn the Rotary encoder to select a setting item, and then
press ENTER.
(e.g. Select AUX SETUP)
4
Turn the Rotary encoder to change the setting, and then
press ENTER.
(e.g. Select AUX ON or AUX OFF)
5
Press and hold AUDIOSETUP for at least 2 seconds to
return to normal mode.
18
-EN
Notes
• Press  to return to the previous mode.
• Pressing and holding  for at least 2 seconds will return to normal
• If no operation is performed for 60 seconds, the unit will return to
"GENERAL" is selected on the setup main menu in step 2.

Displaying the Time

This function controls clock on or off at power off. When the clock
function is set to ON, the unit will display clock at power off.
 Setting item: CLOCK
AUDIO/SETUP

Setting the Clock Display

You can select the clock display type, 12-hour or 24-hour, depending on
your preference.
 Setting item: CLOCK MODE

Setting the AUX SETUP Mode

You can input the audio of an external device, (such as a Portable audio
player) to the AUX connector of this unit.
 Setting item: AUX SETUP
*2

Setting the AUX NAME Mode

You can change the AUX NAME display in the SETUP mode.
 Setting item: AUX NAME
Note
• When the PORTABLE is set, PMD is displayed on the unit.
mode.
normal mode automatically.

General Setting

Setting contents:
OFF / ON (Initial setting)
Setting contents:
24H / 12H (Initial setting)
Setting contents:
AUX OFF / AUX ON (Initial setting)
AUX OFF:
When set to OFF, AUX source cannot be selected.
AUX ON:
Set to ON when a portable device is connected. If SOURCE is
pressed and AUX is selected, the sound of the portable device is
input to the unit.
Setting contents:
AUXILIARY (Initial setting) / TV / DVD / PORTABLE / GAME