Bluetooth Setup; Setting The Bluetooth Connection (Bt In); Setting The Auto Pairing With Ipod/Iphone; Setting The Bluetooth Device - Alpine CDE-196DAB Owner's Manual

Bluetooth SETUP

The following steps 1 to 5 are common to the various Bluetooth
functions. For details, refer to each individual function.
Note
• Set BT IN to ON, and then perform Bluetooth SETUP operation. Refer
to "Setting the Bluetooth Connection (BT IN)" on page 36.
1
Press and hold YSETUP for at least 2 seconds to
activate the SETUP mode.
2
Turn the Rotary encoder to select "BLUETOOTH", and then
press ENTER.
The Bluetooth setup mode is activated.
3
Turn the Rotary encoder to select the desired items, and
then press ENTER.
BLUETOOTH:
*1
 USB PAIR  PAIRED DEV  VISIBLE M 
BT IN
CALL SOUND  CALLER ID  PB UPDATE
*2
 FW VERSION  FW UPDATE
SPEAKER SL
*1 The items are not displayed during a phone call.
*2 If you switch the 2WAY/3WAY system (page 25) to 3WAY
mode, you cannot adjust this item.
4
Turn the Rotary encoder to change the settings.
5
Press and hold YSETUP for at least 2 seconds.
The SETUP mode is cancelled.
Notes
• Press t to return to the previous mode.
• If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
Setting the Bluetooth Connection
(BT IN)
With Bluetooth technology, you can place a hands-free call by a
Bluetooth-equipped Smartphone.
Audio information of a Bluetooth compatible Smartphone, a portable
audio player, etc., is controllable/playable wirelessly from this unit.
 Setting item: BT IN
Setting contents:
OFF / ON (Initial setting)
OFF:
Hands-Free Phone function and Bluetooth Audio function are
disabled.
ON:
Select when you want to pair your Bluetooth compatible phone
with this unit or use Bluetooth Audio function.
Note
• When BT IN is set to OFF, the indicators related to Hands-free phone
( battery charge and signal strength) will not be displayed.
36
-EN

Setting the Auto Pairing with iPod/iPhone

By setting this item to ON, the unit will auto pair when an iPod/iPhone
is connected to this unit via the USB port.
 Setting item: USB PAIR
Setting contents:

Setting the Bluetooth Device

Select one of 5 connected Bluetooth compatible devices that you
*1
 PB ORDER 
previously registered.
*1
 Setting item: PAIRED DEV
1
2
Notes
• If the connection is successfully changed, "CONNECTED" is displayed
for 2 seconds and the  indicator lights up, then the display returns to
the SETUP screen.
• If a Smartphone is connected to this unit successfully, the
lights up to show the battery charge of the connected Smartphone. The
battery is drained. At this time, the Bluetooth function is unavailable
due to the Smartphone powered off.
• Indicator
The indicator will display the current signal strength of your service
provider. The
Smartphone is very weak. The
Smartphone is not in service area or receives no signal.
• Depending on the connected Smartphone, the
and
• A total of 5 devices can be registered. If a 6th device is registered, the
earliest registered device will be deleted automatically.

Setting the Visible Mode

You can set whether this unit can be recognised or not from a Bluetooth
compatible device. Normally set this to ON.
 Setting item: VISIBLE M
Setting contents:
OFF / ON (Initial setting)
OFF:
Turn off the auto pair function.
ON:
Auto pair when an iPod/iPhone is connected to this unit via the
USB port.
Note
• USB Auto-Pairing cannot take place if either device has been paired
previously. Make sure the device name of both has been deleted
from each device.
Turn the Rotary encoder to select a Bluetooth compatible
device you want to use (you want to change connection),
and then press ENTER.
Turn the Rotary encoder to select "CONNECT", then press
ENTER to connect the selected device.
The connected device is marked with " ". Select "DISCONNECT"
to disconnect this device. Select "CLEAR" when you want to clear
the device from the device list.
blinks as a low level warning. The
(Signal Strength):
indicator blinks when the signal of the connected
indicator goes out when the
(signal strength) indicators may not be displayed.
ON (Initial setting) / OFF
ON:
Enable recognition of this unit from the Bluetooth compatible
device.
OFF:
Disable recognition of this unit from the Bluetooth compatible
device.
indicator
indicator goes out when the
(battery charge),