Alpine CDE-193BT Update Manual
Software update manual
Hide thumbs
Also See for CDE-193BT:
- Operating instructions manual (50 pages) ,
- Quick reference manual (124 pages)
Related Manuals for Alpine CDE-193BT
Summary of Contents for Alpine CDE-193BT
- Page 1 Software Update Manual CDE-193BT / CDE-195T / CDE-196DAB UTE-92BT / UTE-93DAB CDE-W296BT...
- Page 2 Firmware Update Instructions Downloading the Firmware Update Visit the Alpine homepage of your region to download the firmware update file to the computer that will be used to perform this update. The update file can be found at your local...
- Page 3 The illustration shows the buttons that will be used during the update procedure. This illustration is based on the CDE-193BT model. The button locations will be different on some models. Please refer to the owner’s manual for your specific model.
- Page 4 3. Set the options as shown below: 4. Before clicking OK, make sure that - File system: ‘FAT32’ (Default) you have selected the correct drive - Make sure to uncheck “Quick Format” WARNING - The selected drive will be erased completely 5.
- Page 5 2. Copy the file to the USB stick 1. Copy the update file downloaded from the Alpine support website “16MY_CD_R_31F9.bin" into the root directory of the USB memory stick. The update file for each head unit has an other name! Please, be sure that the update file is the only file on the USB memory stick.
- Page 6 3. Updating the head unit Do NOT update the firmware while driving. 1. Turn on ACC 2. Turn to the USB source 3. Insert the USB memory stick to the USB connector 4. Push the BAND button and Preset 3 5.
- Page 7 7. At first, unit shut down and restart. The display show „UPD START“ and later „UPD XX%“. 8. “UPD XX%“ will appear on the screen for approximately 10 minutes. Please do not power off the unit and do not push any button, while the “UPDXX“% unit displays 9.