Bt Hands Free Calling; Setup Before Using; About Bluetooth; Before Using Bluetooth Function - Alpine CDE-W235BT Owner's Manual

BT Hands Free Calling

Preset buttons
(1 through 3)
1
2
/ENTER
Rotary encoder
BAND/ABC SKIP

Setup Before Using

About BLUETOOTH

BLUETOOTH is a wireless technology allowing communication
between a mobile device or personal computer over short distances.
This enables a hands-free call or data transmission between
BLUETOOTH compatible devices. BLUETOOTH transmission is
available in the unlicensed 2.4 GHz spectrum if the distance between
devices is within 10 meters. For details, refer to the BLUETOOTH
Home page (http://www.bluetooth.com).
Notes
• Depending on the BLUETOOTH version, a BLUETOOTH compatible
device may not be able to communicate with this unit.
• Proper function of this unit with all BLUETOOTH compatible devices
is not guaranteed. For handling of the BT compatible device, consult
your ALPINE dealer or ALPINE website.
• Depending on the surroundings, BLUETOOTH wireless connection
may be unstable.
• When you place a call, or perform setup operations, be sure to stop your
car in a safe place.
• Depending on the connected BLUETOOTH compatible device(s), the
function may differ. Also refer to the Owner's Manual of the connected
device(s).
• When you search this unit using the BLUETOOTH compatible phone,
the unit name is displayed as "Alpine CD Receiver" model name.
20
-EN
Before using the BLUETOOTH function, the following settings need to
be made.
Preset buttons
(4 through 6)
For details on the control from a BLUETOOTH compatible device, refer
to the Owner's Manual of the BLUETOOTH compatible device.
Pairing a BLUETOOTH compatible device with
AUDIO/SETUP
SSP (Secure Simple Pairing)
VIEW
1
2
3
Pairing a BLUETOOTH compatible device without
SSP (Secure Simple Pairing)
1
2
3
Notes
• If the connection is unsuccessful, "FAILED" is displayed.
• After a successful pairing, the two devices should repair automatically
• Set "VISIBLE M" to VISI M ON to enable this unit to be recognized by
• You can also manually pair the BLUETOOTH devices from this unit.

Before Using BLUETOOTH Function

Set "HFP" or "AUDIO" to ON when you want to use
Hands-Free phone or BT Audio function. Refer to "Setting
the BLUETOOTH Connection (BT IN)" on page 21.
Note
• Before using BLUETOOTH function, it must be paired with this unit.
Refer to "How to connect to a BLUETOOTH compatible device
(Pairing)" on page 20.
How to connect to a BLUETOOTH
compatible device (Pairing)
Using your BLUETOOTH compatible device, select the
"Alpine CD Receiver" for pairing.
Turn the Rotary encoder to change the head unit display
from "PAIR NO" to "PAIR YES" and then press ENTER.
If "PAIR NO" is selected, the connection will be canceled.
If the pairing was successful, "CONNECTED" is displayed
for a few seconds. The head unit then returns to its
previous state.
Using your BLUETOOTH compatible device, select the
"Alpine CD Receiver" for pairing.
Input the PIN code ("0000") in a BLUETOOTH compatible
device.
Note
• The PIN code is fixed as "0000".
If the pairing was successful, "CONNECTED" is displayed
for a few seconds. The head unit then returns to its
previous state.
whenever the vehicle's ignition is turned ON. However, the repairing
may fail. If the auto repairing fails, try to pair manually.
a BLUETOOTH compatible device, refer to "Setting the Visible Mode"
on page 22.
For details, refer to "Pairing a BLUETOOTH Device from the unit" on
page 22.