Assigning An Ip Address To The Print Server - Axis 27979R1 User Manual

Basic Installation

Assigning an IP Address to the Print Server

Receiving an IP
Address with DHCP
Notes:
Important:
Methods for Setting
the IP Address
Automatic IP Address
Assignment
Manual IP Address
Assignment
14
• If you have a DHCP server on your network, your print server will
receive an IP address automatically. The IP address will then appear on
the test page you print by pressing the test button once.
• If you are not working in a DHCP network, you need to set the IP
address of the print server manually.
• You need root privileges on your UNIX, Linux and Mac OS X system, or administrator priv-
ileges on a Windows NT server to set the IP address using RARP, BOOTP, DHCP and to add
an entry to the ARP table with the command 'arp -s'.
• You need to know the Ethernet address of your AXIS 5550 in order to assign an IP address
to it. The Ethernet address is based upon the serial number of your print server. This
means, for example, that an AXIS 5550 with the serial number of 00408C100086, will
have the corresponding Ethernet address of 00 40 8C 10 00 86. The serial number is
located on the bottom label of the print server
• Unless you are assigning an IP address using DHCP or Auto-IP, you must obtain an
unused IP address from your network administrator.
DO NOT use the IP addresses from the examples described here. Consult your network
administrator before assigning an IP address to your print server.
You can obtain an IP address for your AXIS 5550 by using one of the
following methods, depending on your network operating environment.
See "IP Addressing" on page 125 for detailed instructions on IP address
management.
Method Server required
AXIS AddPrinter Wizard No server required
DHCP DHCP server
RARP RARP server
BOOTP BOOTP server
Auto-IP No server required
Method Platform
Comment
"Adding Printers in Windows 2000 / XP /
2003 using AXIS AddPrinter Wizard" on
page 23
Dynamic assignment of IP addresses. See
"Set the IP Address with DHCP" on page 16
Static assignment of IP addresses. Cannot
be used over routers. See "Set the IP Ad-
dress using RARP in UNIX/Linux" on page
17
Static assignment of IP addresses. See "Set
the IP Address using BOOTP in UNIX/Linux"
on page 18
Automatic assignment of IP addresses. See
"Set the IP Address using Auto-IP" on page
18
Comment
AXIS 5550 User's Manual
See