The Test Button; Section 16 The Parameter List - Axis 27979R1 User Manual

Network print servers
Table of Contents

Advertisement

Section 13
Printing a Test Page
Note:
Printing the Server
Report & Parameter
List
Server Report
Parameter List
Performing a Factory
Default
Important:
AXIS 5550 User's Manual

The Test Button

The test button is located on the print server casing and is used for:
Printing a test page to check the connection to the printer.
Printing a server report and parameter list.
Performing a Factory Default of the print server.
If you want to change any of the parameters, use one of the methods
described in Section 10 Management and Configuration, on page 86.
Press the test button once to print a test page. The test page contains
basic information about the AXIS 5550. It is recommended that you print
a test page every time you connect the print server to a printer.
AXIS 5550 has two printer ports. If just one of ports is connected to a printer, the test page will
be printed on that port. If each port is connected to a printer, the default setting will send the
test page to the parallel printer. The default behavior can be changed from the print server's
internal Web pages under Admin | General Settings => Change.
Press the test button twice to print a server report and parameter list
showing the current AXIS 5550 settings.
The Server Report includes the settings of the Axis Network Print Server,
information about your connected printers as well as the current network
settings.
This list provides comprehensive details of all the parameters and their
current status. Refer to Section 16 The Parameter List, on page 137.
1. Remove the external power supply to switch off the print server.
2. Press and hold down the test button while you reconnect the external power
supply.
3. Continue to hold down the test button until the network indicator remains
constantly lit. This should take about 20 seconds.
4. Restart the print server by disconnecting and reconnecting the external
power supply.
A factory default will reset all print server parameters and settings to their
default values, except
• installed certificate
• private key
The Test Button
129

Advertisement

Table of Contents
loading

This manual is also suitable for:

5550

Table of Contents